Page 56 / 110
Scroll up to view Page 51 - 55
48
E-DOC-CTC-20051017-0147 v2.0
Chapter 4
SpeedTouch™ Web Interface
4.3.5
Back up & Restore
Introduction
The
Back up & Restore
page allows you to:
±
Save your current configuration.
±
Restore a previously saved configuration.
Accessing the Backup
& Restore page
Proceed as follows:
1
In the
SpeedTouch
menu, click
Configuration.
2
Click
Configure
.
3
In the
Pick a task
list, click
Save or Restore Configuration.
Saving your current
configuration
Proceed as follows:
1
Click
Back up Configuration Now
.
2
Click
Save
.
3
Choose a location to save your backup file and click
Save
.
Restoring a previously
saved configuration
Proceed as follows:
1
Click
Browse.
2
Select the configuration file you want to restore and click
Open
.
3
Click
Restore Configuration Now.
The SpeedTouch™ loads your configuration and restarts.
At the end of the procedure, the SpeedTouch™ returns to the
Home
page.
Page 57 / 110
49
E-DOC-CTC-20051017-0147 v2.0
Chapter 4
SpeedTouch™ Web Interface
4.3.6
Reset to Factory Defaults
Introduction
The
Reset to Factory Defaults
page allows you to reset the SpeedTouch™ to return
to the initial configuration of your SpeedTouch™. All your changes will be
deleted.The following message appears:
Resetting the
SpeedTouch™ factory
defaults
Proceed as follows:
1
In the left menu, click
SpeedTouch.
2
In the
Pick a task
list, click
Return to Factory Default Settings.
3
Click
Yes, reset my SpeedTouch
.
!
If you reset your SpeedTouch™ to factory default settings, all active
connections will be disconnected.
Page 58 / 110
50
E-DOC-CTC-20051017-0147 v2.0
Chapter 4
SpeedTouch™ Web Interface
4.3.7
Event Logs
Event Logging
The
Event Logs
page summarizes the last events recorded on your SpeedTouch™.
Recorded Events
The
Recorded Events
table gives you an overview of the last event logs that have
been recorded since the SpeedTouch™ was turned on. The first column of the table
indicates the importance of the event log.
Category
The
Category
list allows you to filter the events shown in the
Recorded Events
table. For example, by clicking
Security
you can view all security related events, for
example generated by the SpeedTouch™ firewall.
Indicator
Description
Informational
Warning
Error
Page 59 / 110
51
E-DOC-CTC-20051017-0147 v2.0
Chapter 4
SpeedTouch™ Web Interface
4.4
Broadband Connection
The Broadband
Connection menu
The
Broadband Connection
menu consists of following menu items:
±
DSL Connection
±
Internet Services
The Broadband
Connection page
The
Broadband Connection
page gives you a short status overview of the
connections configured on the SpeedTouch™.
Click
View more
to see more information on the selected broadband connection.
If you configured a dial-up connection, you can establish/terminate the
connection by clicking
Connect/Disconnect
.
Page 60 / 110
52
E-DOC-CTC-20051017-0147 v2.0
Chapter 4
SpeedTouch™ Web Interface
4.4.1
Connectivity Check
Introduction
On this page, you can perform a connectivity check on an Internet service of your
SpeedTouch™. The following message appears:
Checking your Internet
connectivity
Proceed as follows:
1
In the left menu, click
Broadband Connection.
2
In the
Pick a task
list, click
Check connectivity to the Internet.
3
In the
Internet Service to Check
list, click the Internet service that you want to
check.
4
Click
Check Connectivity
.
The SpeedTouch™ lists the test results in the
Test Results
list.
Analysing the test
results
If the test is successful, you will get a list of green check marks. Otherwise a red
cross will indicate which tests have failed.
19216811.live