Page 61 / 89
Scroll up to view Page 56 - 60
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
58
WPA-PSK/ WPA2-PSK
For the WPA-PSK/WPA2-PSK network Authentication, the settings that you can adjust including
WPA/WPA2 Encryption, WPA Pre-Shared Key, and Group key Rotation Interval.
±
WPA Pre-Shared Key:
Please type the key to be between 8 and 63 characters, or 64
hexadecimal digits.
Only the devices with a matching key that you set here can join this network.
±
WPA/WPA2 Encryption & WPA Group Rekey Interval :
Please refer to the WPA/WPA2 part.
Fig. 37 WPA-PSK/WPA2-PSK
Page 62 / 89
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
59
Automatic Security Configuration
Fig. 38 Automatic Security Configuration
WiFi Protected Setup (WPS) is an easy and secure way of configuring and connecting your WiFi access point.
In your case, the DWG875/DWG875T is the Access Point (AP), and Your PC (or Wifi Device) is called the
STA.
When configuring your Wifi Network via WPS, Messages are exchanged between the STA and AP in
order to configure the Security Settings on both devices.
±
WPS Config:
It will help you to
Enable
or
Disable
the WPS feature. To enable you need to select
WPS
,
to disable you need to select
Disabled
.
Note:
After you
Enabled
the WPS you will get the options as show in Fig.35 and the WPS Config State
box will show its configuration status.
±
Device Name:
By using this you can change the factory default to a name of your choice which is up to 32
characters long as like
SSID
.
±
WPS Setup AP:
Here you do not need to change anything,
just skip this step.
±
WPS Add Client:
T
here are two methods “Push-Button” and “PIN”. Select the method you want.
But, the default selection will be “PIN”.
Page 63 / 89
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
60
If you select “Push-Button”, then the
WPS Add Client
option will appear as shown below.
Fig. 39 WPS/Push-Button
And then if you click “
Add
” button then
WPS Setup AP
page will appear as shown in Fig.38
Fig. 40 WPS Setup AP/PUSH
And
WPS Configure Status
will be “In progress”, after establishing the connection the
WPS Configure
Status
will be “Success!” as shown below. After successful connection the client will get IP address from
AP and then internet will be accessible.
Fig. 41 WPS Setup AP successful/PUSH
Page 64 / 89
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
61
If you select
WPS Method
to PIN then it will ask for PIN while configuring the WiFi AP by showing a
text box so, you need to enter PIN to establish
the connection. You can get the PIN from your connected
Wi-Fi client.
Fig. 42 WPS/PIN
±
PIN:
Use this option to set the PIN, enter 4-8 digits PIN of the device you wish to configure. After
entering the pin click “Add” button, then the
WPS Setup AP
page will appear as shown in Fig.41
Fig. 43
WPS Setup AP/PIN
And
WPS Configure Status
will be “In progress”, after establishing the connection the
WPS Configure
Status
will be “Success!” as shown below. After successful connection the client will get IP address from
AP and then internet will be accessible.
Page 65 / 89
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
62
Fig. 44
WPS Setup AP successful/PIN
19216811.live