Page 56 / 109
Scroll up to view Page 51 - 55
W300D
W300D
W300D
Wireless-N
Wireless-N
Wireless-N
ADSL2+
ADSL2+
ADSL2+
Router
Router
Router
51
6.5
6.5
6.5
Advanced
Advanced
Advanced
Wireless
Wireless
Wireless
Setting
Setting
Setting
This section
is to configure the advanced wireless
setting of the
Router,
including the Radio Preamble,
802.11g/n
Rate,
Fragmentation
Threshold,
RTS
Threshold, Beacon Period and DTIM Interval.
BG
BG
BG
Protection
Protection
Protection
Mode
Mode
Mode
For
11b/g
wireless
client,
it
is
easier
to
connect
with
11n
wireless
device.
The
default is
“
Auto
”
.
Basic
Basic
Basic
Data
Data
Data
Rates
Rates
Rates
In term of different requirements, you can
select one of the suitable Basic Data Rates
from
the
drop-down
menu.
Here,
default
Page 57 / 109
W300D
W300D
W300D
Wireless-N
Wireless-N
Wireless-N
ADSL2+
ADSL2+
ADSL2+
Router
Router
Router
52
value is (1-2-5.5-11Mbps…).
Beacon
Beacon
Beacon
Interval
Interval
Interval
The frequency interval of the beacon, which
is
a
packet
broadcast
by
a
router
to
synchronize a wireless network. The default
value is 100 ms. It is recommended not to
modify the default value.
Fragment
Fragment
Fragment
Threshold
Threshold
Threshold
The
fragmentation
threshold
defines
the
maximum transmission packet size in bytes.
The packet will be fragmented if the arrival
is
bigger
than
the
threshold
setting.
The
default size is 2346 bytes.
RTS
RTS
RTS
Threshold
Threshold
Threshold
RTS
stands
for
“Request
to
Send
”
.
This
parameter controls what
size
data packet
the frequency protocol issues to RTS packet.
If the device works in SoHo, do not modify
the default value.
TX
TX
TX
Power
Power
Power
Set
the
wireless
output
power
level.
The
default value is 100.
WMM
WMM
WMM
Capable
Capable
Capable
To
enhance
wireless
multimedia
transfer
performance (0n-line
video
and
voice).
If
you are not clear about this, enable it.
APSD
APSD
APSD
Capable
Capable
Capable
It is used for auto power-saved service. The
default is disabled.
Page 58 / 109
W300D
W300D
W300D
Wireless-N
Wireless-N
Wireless-N
ADSL2+
ADSL2+
ADSL2+
Router
Router
Router
53
6.6
6.6
6.6
Wireless
Wireless
Wireless
Access
Access
Access
Control
Control
Control
To
secure
your
wireless
LAN,
the
wireless
access
control
is
actually
based
on
the
MAC
address
management.
Select
“Wireless
Setting-Access
Control” to popup the following window:
MAC
MAC
MAC
Address
Address
Address
Filter
Filter
Filter
Enable/disable
MAC
address
filter.
Select
“Off” to malfunction MAC address; “Block”
to prevent
the MAC addresses
in
the list
from
accessing
the
wireless
network;
“
Allow” to allow the MAC address in the list
to access the wireless network.
MAC
MAC
MAC
Address
Address
Address
Management
Management
Management
Input the MAC address
to implement the
filter policy. Click
“
Add” to finish the MAC
adding operation.
MAC
MAC
MAC
Address
Address
Address
List
List
List
Show the added MAC address. You can add
or delete them.
Page 59 / 109
W300D
W300D
W300D
Wireless-N
Wireless-N
Wireless-N
ADSL2+
ADSL2+
ADSL2+
Router
Router
Router
54
6.7
6.7
6.7
Wireless
Wireless
Wireless
Connection
Connection
Connection
Status
Status
Status
This page is to show the current wireless access
status. Click “Refresh” to update the wireless
connection information.
MAC
MAC
MAC
Address
Address
Address
Shows the connecting PC
’
s MAC address.
Bandwidth:
Bandwidth:
Bandwidth:
Shows the channel bandwidth of the host to
be connected.
Page 60 / 109
W300D
W300D
W300D
Wireless-N
Wireless-N
Wireless-N
ADSL2+
ADSL2+
ADSL2+
Router
Router
Router
55
Chapter
Chapter
Chapter
7
DHCP
DHCP
DHCP
Server
Server
Server
7.1
7.1
7.1
DHCP
DHCP
DHCP
Server
Server
Server
Setting
Setting
Setting
DHCP (Dynamic Host Control Protocol) is to assign an
IP
address
to
the
computers
on
the
LAN/private
network.
When
you
enable
the
DHCP
Server,
the
DHCP Server will allocate automatically an unused IP
address from the IP address pool to the requesting
computer
in
premise
of
activating
“Obtain
an
IP
Address
Automatically
”
.
So
specifying
the
starting
and ending address of the IP Address pool is needed.
DHCP
DHCP
DHCP
Server:
Server:
Server:
Activate the checkbox to enable
server.
IP
IP
IP
Address
Address
Address
Start/End:
Start/End:
Start/End:
Enter
the
range
of
IP
address
for
DHCP
server assignment.
Lease
Lease
Lease
Time:
Time:
Time:
The time length of the IP address lease.
For example: set the lease time as one
hour
.
Then
the
DHCP
server
will
recycle
and
assign the IP address again.
19216811.live