Concurrent Dual Band Wireless N600 Gigabit Router

4.8.1

Time Settings

This section assists you in setting the device’s system time; you can either select to

set the time and date manually or automatically obtain the GMT time from Internet.

±

Sync

with

Internet

time

servers:

Time and date will be updated

automatically from Internet.

±

Sync Interval:

Determines a time length when device periodically updates

its time and date info from Internet. The default is 2 hours.

±

Time Zone:

Select your current time zone.

±

Copy Local Time:

Click it to copy your PC’s time to the device.

4.8.2

Firmware Upgrade

Firmware upgrade is released periodically to improve the functionality of your

device and also to add new features. If you run into a problem with a specific

feature of the device, log on to our website www.tendacn.com

to download the

latest firmware to update your device.

61

Concurrent Dual Band Wireless N600 Gigabit Router

To update firmware, do as follows:

±

1. Click "Browse” to locate the firmware and "Upgrade” to update.

±

2. Router will reboot automatically when upgrade completes.

NOTE:

Do not disconnect the device from your management PC (the PC you use to

configure the device) or power off it during the upgrade process; otherwise, it may

be permanently damaged. The device will restart automatically when the upgrade

process, which takes several minutes, completes.

4.8.3

Backup/Restore Settings

This section allows you to backup current settings or to restore the previous

settings configured on the device.

±

Backup Settings:

Once you have configured the device the way you want it,

you can save these settings to a configuration file on your local hard drive that

can later be imported to your device in case that the device is restored to

factory default settings. To do this, click the “Backup” button and specify a

directory to save settings on your local hardware.

±

Restore

Settings:

Click

the

"Browse"

button

to

locate

and

select

a

configuration file that is saved previously to your local hard drive. And then

click the "Restore" button to reset your device to previous settings.

62

Concurrent Dual Band Wireless N600 Gigabit Router

4.8.4 Restore to Factory Default Settings

To restore all settings to the device's factory default values, click the "Restore to

Factory Default” button:

Factory Default Settings:

±

User Name:

admin

±

Password:

admin

±

IP Address:

192.168.0.1

±

Subnet Mask:

255.255.255.0

Note:

To activate your settings, you need to reboot the device after you reset it.

4.8.5

Change Password/User Name

This section allows you to change login password and user name for accessing

device’s Web-based interface.

¾

Old Password/User Name:

Enter the old password/user name.

¾

New Password/User Name:

Enter a new password/user name.

¾

Confirm New Password:

Re-enter the new password for confirmation.

¾

Save:

Click it to save new settings.

NOTE:

For the sake of security, it is highly recommended that you change default

login password and user name.

63

Concurrent Dual Band Wireless N600 Gigabit Router

4.8.6

Reboot

This section allows you to reboot the device.

To restart your device, click the “Reboot” button.

4.8.7 Statistics

Statistics displays current traffic of PCs on your LAN.

±

Enable Traffic Statistics:

Check/uncheck the box to enable/disable the Traffic

Statistics feature.

±

Refresh:

Click to update statistic data.

±

Clear:

Click to remove statistic data.

64

Concurrent Dual Band Wireless N600 Gigabit Router

Note:

Enabling the Traffic Statistics feature may degrade router’s packet processing

capacity. So, do not enable it unless necessary.

4.8.8 Syslog

The Syslog option allows you to view all events that occur upon system startup

and check whether there is attack present in your network.

The logs are classified into 3 types: “All”, “System “and “WAN”.

65