Page 51 / 91
Scroll up to view Page 46 - 50
D840R ADSL2+ Router User Guide
e.
Click “Next” to display
the window shown in the
right figure. This window
lists your settings.
g.
Click “Save/Reboot” to
activate your settings.
46
Page 52 / 91
D840R ADSL2+ Router User Guide
Bridging mode
1)
Select “Bridging”.
Encapsulation Mode:
VC/MUX
LLC/SNAP-BRIDGING
Once you select a
mode, the system
automatically changes
the encapsulation
mode into the one
matching your setting.
Therefore, it is
recommended to keep
the default setting
unchanged.
2)
Enable Bridge Service:
To select the bridge
mode, you need to
check this option. By
default, this option is
checked.
47
Page 53 / 91
D840R ADSL2+ Router User Guide
3)
Click “Next” to display
the window shown in
the right figure. This
window
lists
your
settings.
4)
Click “Save/Reboot” to
activate your settings.
48
Page 54 / 91
D840R ADSL2+ Router User Guide
5.2.2 LAN
1). IP Address: IP address
used by the router to
connect to the LAN.
This option is set to
192.168.1.1 upon
device delivery. You
can change it as
required.
Caution: After changing
this IP address, you
need to use the new IP
address to access the
Web management
window upon next
login to the router. In
addition, you must set
the default gateway in
each computer in your
LAN to this IP address,
to ensure normal
Internet access.
2). Subnet Mask: Setting
49
Page 55 / 91
D840R ADSL2+ Router User Guide
your subnet mask.
3). Enable IGMP Snooping:
Used in the bridge
mode.
4). Standard Mode
5). Blocking Mode
6). Configure the second IP
Address and Subnet
Mask for LAN interface.
Click “Save/Reboot”.
50
19216811.live