Page 11 / 56
Scroll up to view Page 6 - 10
VSG1432 User Setup Guide
11
2
Press the
WLAN/WPS
button for five seconds and release it.
3
Enable WPS on another WPS-enabled client device within range of the Device. If you do not know
how to enable WPS on that client device, refer to its manual. The
WLAN/WPS
LED flashes green
and orange while the Device sets up a WPS connection with the other WPS enabled client device.
4
Once the connection is successfully made, the
WLAN/WPS
LED shines green.
Page 13 / 56
VSG1432 User Setup Guide
13
C
HAPTER
2
User Setup Guide
2.1
Overview
This guide shows you how to use the Device’s various features.
•
Setting Up a Secure Wireless Network
, see
page 14
•
Setting Up Multiple Wireless Groups
, see
page 22
•
Wireless MAC Authentication for Blocking a Computer’s Access to the Wireless Network
, see
page 25
•
Setting Up NAT Forwarding for a Game Server
, see
page 27
•
Access Your Home Computer from the Internet Using DDNS
, see
page 30
•
Firewall Setup
, see
page 32
•
MAC Filter Setup for Blocking LAN Computers
, see
page 35
•
Scheduler Rules and Parental Control
, see
page 37
•
LAN DHCP for IP Addressing Assignment
, see
page 40
•
Check the Firmware Version
, see
page 43
•
Restore to Factory Default
, see
page 44
2.1.1
Access the Web Configurator for Setting Up the Device
You will need to log in to the Web Configurator to configure the Device. Enter the LAN IP address of
Note: The default LAN IP address, username and password are on the label on the
bottom of the Device.
Page 14 / 56
VSG1432 User Setup Guide
14
Enter the
Username
and
Password
in the fields in the top right corner. The default
Username
is
admin
and the default
Password
is
telus
. Click
Login
.
2.2
Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to access the Internet.
In this wireless network, the Device serves as an access point (AP), and the notebook is the
wireless client. The wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the Device. Then he can set up a wireless
network using WPS (
Section 2.2.2 on page 16
) or manual configuration (
Section 2.2.3 on page 20
).
2.2.1
Configuring the Wireless Network Settings
This example uses the following parameters to set up a wireless network.
SSID
Example
Security Mode
Mixed WPA2-PSK/WPA-PSK
Pre-Shared Key
DoNotStealMyWirelessNetwork
802.11 Mode
802.11b/g/n Mixed
19216811.live