1. Home
    2. /
  2. Manuals
    3. /
  3. Teltonika
    4. /
  4. RUT950
    5. /
  5. 5
Page 21 / 145 Scroll up to view Page 16 - 20
21
4.
SIM card state
Ready
Indicates the SIM card's state, e.g. PIN required, Not inserted, etc.
5.
Signal strength
-88 dBm
Received Signal Strength Indicator (RSSI). Signal's strength
measured in dBm
6.
Cell ID
2C86315
ID of operator cell that device is currently connected to
7.
RSRP
-119 dBm
Indicates the Reference Signal Received Power
8.
RSRQ
-11 dBm
Indicates the Reference Signal Received Quality
9.
SINR
-1.2 dBm
Indicates the Signal to Interference plus Noise Ratio
10.
Operator
OMNITEL LT
Operator's name of the connected GSM network
11.
Operator state
Registered (home)
GSM network's status
12.
Connection type
4G (LTE)
Indicates the GSM network's access technology
13.
Bytes received
39.9 KB (40832
bytes)
How many bytes were received via mobile data connection
14.
Bytes sent
27.0 KB (27674
bytes)
How many bytes were sent via mobile data connection
6.3.1.2
WAN
Display information about WAN connection.
Page 22 / 145
22
WAN information:
Field Name
Sample Value
Explanation
1.
Interface
Wired
Specifies through what medium the router is connecting to the internet.
This can either be Wired, Mobile or Wi-Fi.
2.
Type
Static
Specifies the type of connection. This can either be static or DHCP.
3.
IP address
192.168.99.69
The IP address that the routers uses to connect the internet.
4.
WAN MAC
00:1E:42:00:00:01
MAC (Media Access Control) address used for communication in a Ethernet
WAN (Wide Area Network)
5.
Netmask*
255.255.255.0
Specifies a mask used to define how large the WAN network is
6.
Gateway*
192.168.99.254
Indicates the default gateway, an address where traffic destined for the
internet is routed to.
7.
DNS*
8.8.8.8
Domain name server(s).
8.
Connected*
1h 45m 27s
How long the connection has been successfully maintained.
*-These fields show up on other connection modes.
** - Exclusively to other Modes with DHCP.
6.3.1.3
LAN
Display information about LAN connections.
LAN information:
Field Name
Sample Value
Explanation
1.
Name
Lan
LAN instance name
2.
IP address
192.168.99.218
Address that the router uses on the LAN network.
3.
Netmask
255.255.255.0
A mask used to define how large the LAN network is
4.
Ethernet MAC
address
00:1E:42:00:00:00
MAC (Media Access Control) address used for communication in a Ethernet
LAN
(Local
Area Network)
5.
Connected for
1h 53m 56s
How long LAN has been successfully maintained.
Page 23 / 145
23
DHCP Leases
If you have enabled a DHCP server this field will show how many devices have received an IP address and what
those IP addresses are.
Field Name
Sample Value
Explanation
1.
Hostname
?
DHCP client's hostname
2.
IP address
192.168.99.120
Each lease declaration includes a single IP address that has been leased to
the client
3.
LAN name
Lan
LAN instance name
4.
MAC address
D4:85:64:65:2B:D4
The MAC (Media Access Control) address of the network interface on
which the lease will be used. MAC is specified as a series of hexadecimal
octets separated by colons
5.
Lease time
remaining
10h 11m 13s
Remaining lease time for addresses handed out to clients
6.3.1.4
Wireless
Wireless can work in two modes, Access Point (AP) or Station (STA). AP is when the wireless radio is used to
create an Access Point that other devices can connect to. STA is when the radio is used to connect to an Access Point via
WAN.
6.3.1.4.1
Station
Display information about wireless connection (Station mode).
Page 24 / 145
24
Client mode information
Field Name
Sample Value
Explanation
1.
Channel
1 (2.41 GHz)
The channel that the AP, to which the router is connected to, uses.
Your wireless radio is forced to work in this channel in order to
maintain the connection.
2.
Country code
00 (World)
Country code.
3.
SSID
Teltonika_Router
The SSID that the AP, to which the routers is connected to, uses.
4.
Mode
Station (STA)
Connection mode
–
Client indicates that the router is a client to
some local AP.
5.
Encryption
no encryption
The AP, to which the router is connected to, dictates the type of
encryption.
6.
Wireless MAC
00:1E:42:10:80:22
The MAC address of the access points radio.
7.
Signal Quality
61%
The quality between routers radio and some other device that is
connecting to the router. Will show 0% if no devices are trying to
connect or are currently maintaining a connection.
8.
Bit rate
43.3 MBit/s
The physical maximum possible throughput that the routers radio
can handle. Keep in mind that this value is cumulative - The bit rate
will be shared between the router and other possible devices that
connect to the local AP.
6.3.1.4.2
Access Point
Display information about wireless connection (Access Point mode).
Page 25 / 145
25
Wireless AP information
Field Name
Sample Value
Explanation
1.
Channel
11 (2.46 GHz)
The channel which is used to broadcast the SSID and to establish new
connections to devices.
2.
Country code
00(World)
Country code.
3.
SSID
Teltonika_Router_Test
The SSID that is being broadcast. Other devices will see this and will be
able to use to connect to your wireless network.
4.
Mode
Access Point (AP)
Connection mode
–
Master indicates that you router is an access
point.
5.
Encryption
No Encryption
The type of encryption that the router will use to authenticate,
establish and maintain a connection.
6.
Wireless MAC
00:1E:42:00:00:03
MAC address of your wireless radio.
7.
Signal Quality
80%
The quality between routers radio and some other device that is
connecting to the router. Will show 0% if no devices are trying to
connect or are currently maintaining a connection.
8.
Bit rate
54.0 MBit/s
The bit rate will be shared between all devices that connect to the
routers wireless network.
Additional note: MBit/s indicates the bits not bytes. To get the throughput in bytes divide the bit value by 8, for
e.g. 54MBits/s would be 6.75MB/s (Mega Bytes per second).
6.3.1.5
Associated Stations
Outputs a list of all devices and their MAC addresses that are maintain a connection with your router right now.
This can either be the information of the Access Point that the router is connecting to in STA mode or a list of all
devices that are connecting to the router in AP mode:
Field Name
Sample Value
Explanation
1.
MAC Address
FC:C2:DE:91:36:A6
Associated station's MAC (Media Access Control) address
2.
Device Name
Android-9aed2b2077a54c74
DHCP client's hostname
3.
Signal
-54dBm
Received Signal Strength Indicator (RSSI). Signal's strength
measured in dBm
4.
RX Rate
24.0Mbit/s, MCS 0, 20MHz
The rate at which packets are received from associated station
5.
TX Rate
54.0Mbit/s, MCS 0, 20MHz
The rate at which packets are sent to associated station
6.3.1.6
OpenVPN Client
Display OpenVPN connection information on client side.

Rate

4 / 5 based on 3 votes.

Popular Teltonika Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top