Telstra Ultimate-AC753S Router Manual PDF (Setup & Configuration Guide)

Page 11 / 24 Scroll up to view Page 6 - 10

11

with the SIM card installed.

Note:

The Telstra Ultimate® Mobile Wi-Fi comes

with the SIM card installed.

If you need to replace the SIM card:

1. Remove the cover.

2.

Slide the silver SIM card holder to the

Open position.

Page 12 / 24

12

3. Lift up the edge of the SIM card holder and

place the SIM card underneath it, as shown in

the illustrations.

4. Lower the SIM card holder and slide it to the

Locked position.

Page 13 / 24

13

START USING YOUR

TELSTRA ULTIMATE®

MOBILE Wi-Fi

1. Press and hold the Power button for a few

seconds to turn on your Telstra Ultimate® Mobile

Wi-Fi. The LCD will display your credentials Wi-Fi

Network Name and Security Key (WPA).

2. On your device, go to Wireless Network Settings

and ensure your Wi-Fi function is enabled.

(Mac users: make sure AirPort is turned on.

PC users: Ensure your Wi-Fi function is turned on.

For all other devices, please refer to your

device manual.)

Once your Wi-Fi is enabled, select the Wi-Fi

Network Name SSID) displayed on the LCD of

the device (for example, Ultimate-xxxx).

3. When prompted, enter your Security Key, as it

appears on the LCD screen.

Page 14 / 24

14

4.

The Telstra Ultimate® Mobile Wi-Fi will

automatically connect to the Next G®

network, provided you’re in a Next G network

coverage area.

5.

If you wish to change the access or device

conﬁguration, go to the device homepage

(http://ultimate.telstra) and log in with the Admin

Password, Admin_Ultimate (in the upper left

corner of the homepage).

you may need to disable it via the device

Telstra Ultimate® Mobile Wi-Fi. To do this go to

Advanced Setting/Select SIM under the WAN

Ending your internet session

To end your Wi-Fi session, you can either:

Press and hold the power button for a few

seconds to turn off.

Click the Disconnect button on the Telstra

Homepage (go to the device homepage by

typing http://ultimate.telstra into your browser).

Note:

If your device is supplied with a SIM PIN

you may need to disable it via the device

homepage before you can start using your

Telstra Ultimate® Mobile Wi-Fi. To do this go to

Advanced Setting/Select SIM under the WAN

menu and choose Disable.

Page 15 / 24

15

RECHARGING

YOUR BATTERY

Your battery comes partially charged. When you

need to recharge it:

1.

Plug the micro USB cable into the device.

2.

Plug the other end of the cable into the:

• AC adapter and plug the adapter into an

electrical outlet, or

• USB port on your computer.

Rate

Popular Telstra Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share