Page 66 / 69 Scroll up to view Page 61 - 65
Page 66 of 69
Figure 68. Management – Save/Reboot
Click “Save/Reboot” to reboot the AH4021. The AH4021 would automatically
save the configuration before reboot, so that modified settings would take
effect after reboot.
Page 67 / 69
Page 67 of 69
4
Appendix
ATM
-
Support up to 8 ATM PVCs, and all PVCs work well concurrently and independently
-
Supports UBR, CBR, and rt-VBR and nrt-VBR service classes
-
Provides ATM layer functionality
-
Supports MPoA functionality (RFC2684)
-
Supports PPPoA (RFC2364)
-
Supports IP over ATM (IPoA)
-
The format of data packet between ATU-C and AH4021 support ATM cell format specified in
ITU-T Rec. I.361
-
Supports ATM Forum UNI 3.1/4.0 PVC
ADSL
-
Support ANSI T1.413 Issue 2
-
Support ITU-T G.992.1 (G.DMT), G.992.2 (G.Lite) G.992.3 (ADSL 2), and G.992.5 (ADSL 2+)
-
Multiple protocol over AAL5 (RFC2684)
-
Support ATM cell format ITU -T I.361
-
ATM Forum UNI 3.1/4.0 PVC
-
Support up to 8 PVCs -traffic shaping (CBR, UBR, rt-VBR, nrt-VBR)
-
Supports AIS, RDI, and OAM F4/F5 loopback
PPP Support
-
PPPoA (RFC 2364)
-
PPPoE (RFC 2516)
Bridging
-
Ethernet to ADSL self -learning. Transparent Bridging
-
Filtering functions - MAC address filtering and protocol filtering for up-link (IEEE802.1d)
Routing
-
RIP v1/v2
-
Static routing
-
NAT with ALGs
-
DHCP Server/Relay/Client
-
DNS Relay
-
NAT/NAPT
-
IGMP Proxy
VoIP
-
Support SIP (RFC3261)/MGCP (RFC3435)
-
Supports RTP/RTCP (RFC1889)
-
Voice codec: G.711, G.726, G.729a (optional), G.723.1 (optional)
-
G.168 Echo Cancellation
-
Support FAX/modem tone detection and auto-fallback to G.711
-
Support ITU-T T.38 standard (optional)
Page 68 / 69
Page 68 of 69
-
Supports MGCP NAT Traversal (Heartbeat) (IETF draft-aoun-mgcp-nat-package-02) (MGCP
only)
-
Support call hold, call waiting, call forwarding, caller ID, call progress tone, call transfer, call
conference (SIP only)
Radio - WLAN
-
Standard: IEEE 802.11g and 802.11b
-
Media Access Control: CSMA/CA with ACK
-
Modulation: OFDM /CCK
-
Frequency Range (Range depends on different country):
-
Output Power: 15 dBm (typical)
-
Sensitivity: -67 (54Mbps) / -83 (11Mbps) dBm (typical)
-
Data Rate: 54, 48, 36, 24, 18, 12, 11, 6, 5.5, 2, 1Mbps, auto-fallback
Radio - Bluetooth (optional)
-
Standard: Bluetooth SIG Spec V1.2
-
Sensitivity: -85 dBm (typical)
-
Data Rate: 1 Mbps
-
Output Power: 17 dBm (typical)
Security
-
Password protected system management
-
User authentication for PPP (PAP/CHAP/MSCHAP)
-
Firewall
Stateful Inspection
IDS
-
Packet Filtering
-
SSH
-
Access Control List
-
Wireless Security:
Support WEP (64, 128-bit) encryption
802.1x and WPA/WAP2 authentication
MAC Address-based access control
WDS support
QoS
-
ATM: CBR, rt-VBR, nrt-VBR, UBR
-
IP: IP ToS function (RFC 1349), supports priority queues for upstream traffic based on ToS
field.
Configuration Management
-
LAN/WAN management via Telnet interface or Web-based browser interface
-
SNMP MIB 2 management (RFC 1213)
-
Firmware upgrade available by TFTP/ FTP/HTTP
-
Status display and event report from Web-based management
Physical Interfaces
-
One Asymmetrical Digital Subscriber Line (ADSL) interface (RJ-11)
-
Two 10/100BaseT Ethernet port (RJ-45)
-
One USB port
Page 69 / 69
Page 69 of 69
-
Two Telephone interfaces (RJ-11)
-
Antenna: Dual Antenna diversity system
-
PSTN Backup line (RJ-11) (shares the same port for ADSL)
Power Requirement
-
Input: 110/220 VAC, 50/60 Hz
-
Output: 16 VDC, 900 mA
Operating Environment
-
Temperature: 0 ~40
0
C
-
Humidity: 10 to 90%, non- condensing
Physical Specification
-
Dimension: 208 (W) x 148 (L) x 42 (H) mm

Rate

3.5 / 5 based on 2 votes.

Popular Tecom Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top