Page 51 / 132
Scroll up to view Page 46 - 50
S
ETUP
W
IZARD
4-7
Wi-Fi Channel
Number
The radio channel used by the BARRICADE and its
clients to communicate with each other. This channel
must be the same on the BARRICADE and all of its
wireless clients.
The BARRICADE will automatically assign itself a radio
channel, or you may select one manually.
(Default channel: 6)
Extend Range
Increases the range of the BARRICADE.
(Default: Disable)
Parameter
Description
Page 52 / 132
C
ONFIGURING
THE
BARRICADE
4-8
Internet Settings
Specify the WAN connection type required by your Internet Service
Provider. Specify Cable modem, Fixed-IP xDSL, PPPoE xDSL, PPTP or
BigPond.
Select your connection type to proceed. Click
BACK
to go back and
change your settings.
Page 53 / 132
S
ETUP
W
IZARD
4-9
Cable Modem Settings
If the ISP requires you to input a Host Name, type it in the Host Name
field. The MAC Address field will be filled automatically.
Click
NEXT
to proceed, or
BACK
to change your settings.
Page 54 / 132
C
ONFIGURING
THE
BARRICADE
4-10
ADSL Settings - Fixed-IP xDSL
Enter the IP address, Subnet Mask, and Gateway IP address provided to
you by your ISP in the appropriate fields below.
Click
NEXT
to proceed, or
BACK
to change your settings.
Page 55 / 132
S
ETUP
W
IZARD
4-11
ADSL Settings - PPPoE
Enter the User Name and Password required by your ISP in the
appropriate fields. If your ISP has provided you with a Service Name enter
it in the Service Name field, otherwise, leave it blank. Leave the Maximum
Transmission Unit (MTU) at the default value (1454) unless you have
a particular reason to change it. Enter the maximum idle time for the
Internet connection. After this time has been exceeded the connection will
be terminated. Check
Keep session
to keep the session alive. Check the
Auto-connect
check box to automatically re-establish the connection as
soon as you attempt to access the Internet again. Check the
Manual-
connect
check box to manually re-establish the connection.
Click
NEXT
to proceed, or
BACK
to change your settings.
Note:
Clicking
NEXT
will not automatically connect the BARRICADE
to the Internet. The BARRICADE will only connect when you
explicitly request it to, for example, by launching your web
browser.
19216811.live