Page 61 / 131
Scroll up to view Page 56 - 60
C
ONFIGURING
THE
B
ARRICADE
4-26
1483 Routing
Confirm Password
Confirm password
MTU
Leave the Maximum Transmission Unit (MTU) at the default
value unless instructed by your ISP
Parameter
Description
IP Address
Enter the IP address provided by your ISP.
Subnet Mask
Enter the subnet mask address provided by your ISP.
Default Gateway
Enter the gateway address provided by your ISP.
VPI/VCI
Enter the Virtual Path Identifier (VPI) and Virtual
Circuit Identifier (VCI) supplied by your ISP.
Encapsulation
Select the encapsulation used by ISP from the drop
down list.
QoS Class
ATM QoS classes including CBR, UBR and VBR
PCR/SCR/MBS
QoS Parameters - PCR, SCR and MBS are configurable.
DHCP Client
Check the box if your ISP assigns an IP address
dynamically.
Parameter
Description
Page 62 / 131
C
ONFIGURATION
PARAMETERS
4-27
PPPoE
Parameter
Description
VPI/VCI
Enter the Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) supplied by your ISP.
Encapsulation
Select the encapsulation used by ISP from the drop-down
menu.
QoS Class
ATM QoS classes including CBR, UBR and VBR
PCR/SCR/MBS
QoS Parameters - PCR, SCR and MBS are configurable.
IP assigned by ISP
Select yes, if your ISP assigns IP address dynamically.
IP Address
If you have selected “No” in the previous field, type in
the IP address provided by your ISP.
Subnet Mask
Enter the subnet mask address provided by your ISP.
Connect Type
Sets connection mode to Always connected,
Auto-Triggered by traffic or Manual connection. For flat
rate services use Always connected.
Idle Time
(Minute)
Enter the maximum idle time for the Internet
connection. After this time has been exceeded the
connection will be terminated. This setting only applies
when the Connect Type is set to Auto-Triggered by
traffic.
Username
Enter user name.
Password
Enter password.
Page 63 / 131
C
ONFIGURING
THE
B
ARRICADE
4-28
IP Over RFC1483 bridged
Confirm Password
Confirm password
MTU
Leave the Maximum Transmission Unit (MTU) at the
default value unless instructed by your ISP.
Parameter
Description
IP Address
Enter the IP address provided by your ISP.
Subnet Mask
Enter the subnet mask address provided by your ISP.
Default Gateway
Enter the gateway address provided by your ISP.
VPI/VCI
Enter the Virtual Path Identifier (VPI) and Virtual
Circuit Identifier (VCI) supplied by your ISP.
Encapsulation
Select the encapsulation used by ISP from the
drop-down menu.
QoS Class
ATM QoS classes including CBR, UBR and VBR
PCR/SCR/MBS
QoS Parameters - PCR, SCR and MBS are configurable.
DHCP Client
Check the box if your ISP assigns an IP address
dynamically.
Parameter
Description
Page 64 / 131
C
ONFIGURATION
PARAMETERS
4-29
Clone MAC Address
Some ISPs require you to register your MAC address with them. If this is
the case, and you have previously registered the MAC address of another
device, the MAC address of the Barricade must be changed to the MAC
address that you have registered with your ISP.
Page 65 / 131
C
ONFIGURING
THE
B
ARRICADE
4-30
DNS
A Domain Name Server (DNS) is an index of IP addresses and Web
addresses. If you type a Web address into your browser, such as
www.smc.com, a DNS server will find that name in its index and find the
matching IP address: xxx.xxx.xxx.xxx. Most ISPs provide a DNS server
for speed and convenience. Since your Service Provider may connect to
the Internet with dynamic IP settings, it is likely that the DNS server IP's
are also provided dynamically. However, if there is a DNS server that you
would rather use, you need to specify the IP address here.
19216811.live