1. Home
    2. /
  2. Manuals
    3. /
  3. SMC
    4. /
  4. SMC7004ABR
    5. /
  5. 19
Page 91 / 112 Scroll up to view Page 86 - 90
C
ONFIGURING
P
RINTER
S
ERVICES
6-5
3.
Specify the printer type attached to the Barricade.
4.
Select the monitored port (the default port name is “SMC100”)
and then click the “Configure Port” button.
5.
Enter the IP address of the Barricade and click “OK,” and then
click “Next” in the Add Printer Wizard dialog box.
6.
Continue following the prompts to finish installing the Barricade
print server. The printer type you specified will now be added to
your “Printers” menu.
Downloaded from
www.Manualslib.com
manuals search engine
Page 92 / 112
C
ONFIGURE
THE
P
RINT
S
ERVER
6-6
Configure the Network Printer in Windows NT
1.
On a Windows NT platform, open the “Printers” window in
the
My Computer menu, and double-click the “Add Printer” icon.
2.
Follow the prompts to add a local printer to your system.
Downloaded from
www.Manualslib.com
manuals search engine
Page 93 / 112
C
ONFIGURING
P
RINTER
S
ERVICES
6-7
3.
Select the monitored port. The default port name is “SMC100.”
Then click the “Configure Port” button.
4.
Enter the IP address of the Barricade and click “OK,” and then
click “Next” in the Add Printer Wizard dialog box.
5.
Specify the printer type attached to the Barricade.
6.
Continue following the prompts to finish installing the
Barricade print server. The printer type you specified will now
be added to your “Printers” menu.
Downloaded from
www.Manualslib.com
manuals search engine
Page 94 / 112
C
ONFIGURE
THE
P
RINT
S
ERVER
6-8
Configure the Network Printer in Unix Systems
Follow the traditional configuration procedure on Unix platforms
to set up the Barricade print server. The printer name is “lpt1.”
Downloaded from
www.Manualslib.com
manuals search engine
Page 95 / 112
A-1
A
PPENDIX
A
T
ROUBLESHOOTING
This appendix describes common problems you may encounter
and possible solutions to them. The Barricade can be easily monitored
through panel indicators to identify problems. If you cannot
resolve any connection problems after checking the indicators,
then refer to the other sections in the following table.
Troubleshooting Chart
Symptom
Action
LED Indicators
Power LED is Off
•
External power supply has failed or is
disconnected.
•
Check connections between the Barricade, the
external power supply, and the wall outlet.
•
If the power indicator does not turn on when the
power cord is plugged in, you may have a
problem with the power outlet, power cord, or
external power supply.
However, if the unit powers off after running for
a while, check for loose power connections,
power losses or surges at the power outlet.
If you still cannot isolate the problem, then the
external power supply may be defective. In this
case, contact SMC Technical Support for
assistance.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular SMC Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top