Page 51 / 112
Scroll up to view Page 46 - 50
C
ONFIGURING
THE
B
ARRICADE
4-19
Viewing Network and Device Status
You can use the following screen to display WAN/LAN connection
status, firmware and hardware version numbers, any illegal
attempts to access your network, as well as information on all
DHCP clients connected to your network.
The following items are included in this screen:
Field
Description
INTERNET
Displays WAN connection type and status.
GATEWAY
Displays system IP settings, as well as DHCP,
NAT, Firewall and Printer status.
INFORMATION
Displays the number of attached clients, the
firmware versions, the physical MAC address
for each media interface, as well as the
hardware version and serial number.
Security Log
Displays any illegal attempts to access your
network.
Save
Click on this button to save a security log file.
Downloaded from
www.Manualslib.com
manuals search engine
Page 52 / 112
U
SING
S
YSTEM
T
OOLS
4-20
Using System Tools
You can use the “Tools” menu to reboot the Barricade, restore
factory settings, or update firmware.
The “Backup Settings” button allows you to save your Barricade’s
configuration to a file named config.bin on your PC. You can then
click on the “Restore Settings” button to restore the saved backup
configuration file.
Note:
If you use the Reset button on the front panel, the Barricade
performs a power reset and restores the factory settings.
Clear
Click on this button to delete the access log.
DHCP Client Log
Displays information on all DHCP clients on
your network.
Release
Click on this button to confirm DHCP settings.
Renew
Click on this button to refresh DHCP settings.
Downloaded from
www.Manualslib.com
manuals search engine
Page 53 / 112
5-1
C
HAPTER
5
C
ONFIGURING
C
LIENT
TCP/IP
If you have not previously installed the TCP/IP protocol on your
client PCs, refer to the following section. If you need information
on how to configure a TCP/IP address on a PC, refer to “Setting
TCP/IP to Work with the Barricade” on page 5-3.
Installing TCP/IP Protocol in Your PC
1.
Click the
Start
button and choose
Settings
, then click
Control
Panel
.
2.
Double click the
Network
icon and select the
Configuration
tab
in the Network window.
3.
Click the
Add
button to add the network component to your PC.
4.
Double click
Protocol
to add the TCP/IP protocol.
Downloaded from
www.Manualslib.com
manuals search engine
Page 54 / 112
I
NSTALLING
TCP/IP P
ROTOCOL
IN
Y
OUR
PC
5-2
5.
Select the
Microsoft
item in the manufacturers list. And choose
TCP/IP
in the Network Protocols. Click the
OK
button to return
to the Network window.
6.
The TCP/IP protocol will be listed in the Network window.
Click
OK
to complete the install procedure and restart your PC
to enable the TCP/IP protocol.
Downloaded from
www.Manualslib.com
manuals search engine
Page 55 / 112
C
ONFIGURING
C
LIENT
TCP/IP
5-3
Setting TCP/IP to Work with the Barricade
1.
Click the
Start
button and choose
Settings
, then click
Control
Panel
.
2.
Double click the
Network
icon. Select the TCP/IP line that has
been assigned to your network card in the
Configuration
tab
of the Network window.
3.
Click the
Properties
button to set the TCP/IP protocol for the
Barricade.
4.
You can dynamically assign TCP/IP address settings to a client,
or you can manually configure a client with address settings to
meet your specific network requirements. (Note that the default
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live