1. Home
    2. /
  2. Manuals
    3. /
  3. SmartRG
    4. /
  4. SR360n v2
    5. /
  5. 19
Page 91 / 117 Scroll up to view Page 86 - 90
Page 91
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Manual Setup
Network Authentication: Mixed WPA2-WPA
The individual fields on this screen are defined as follows:
Field Name
Description
Select SSID
Select the SSID from the drop-down list for the wireless network to which this secu-
rity configuration will apply.
WPA2 Preauthentication
Network Re-Auth Interval
WPA Group Rekey Interval
[1-65535 seconds] The frequency with which the gateway automatically updates the
group key and sends it to connected LAN client devices.
RADIUS Server IP address
Enter the IP address for the Remote Authentication Dial In User Service server as-
sociated with your infrastructure.
RADIUS Port
Port 1812 for authentication is a standard for RADIUS authentication per the IETF
RFC 2865. Your RADIUS deployment may differ from this. Older servers may use port
1645.
RADIUS Key
Enter the encryption key required to authenticate to the Radius Server specified via
the Server IP address above.
WPA/WAPI Encryption
[AES, TKIP+AES]
Choose from Advanced Encryption Standard (AES) or AES com-
bined with Temporary Key Integrity Protocol (TKIP). This field has been pre-popu
-
lated with the option most complimentary to the Network Authentication selected.
WEP Encryption
[Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.
Encryption Strength
[128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more
robust option for security.
Current Network Key
[1-4] Select which of the four keys from the list is presently in effect.
Page 92 / 117
Page 92
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Field Name
Description
Network Key 1-4
Enter up to four encryption keys using the on-screen instructions to achieve the de-
sired security strength (128 or 64 bit).
Manual Setup
Network Authentication: Mixed WPA2/WPA-PSK
The individual fields on this screen are defined as follows:
Field Name
Description
Select SSID
Select the SSID from the drop-down list for the wireless network to which this secu-
rity configuration will apply.
WPA2 Preauthentication
When enabled, clients can pre-authenticate with the gateway while still connected
to another AP.
Network Re-Auth Interval
[0-2,147,483,647 seconds] The interval that the client must re-authenticate with the
gateway.
WPA Group Rekey Interval
[1-65535 seconds] The frequency with which the gateway automatically updates the
group key and sends it to connected LAN client devices.
WPA/WAPI Encryption
[AES, TKIP+AES]
Choose from Advanced Encryption Standard (AES) or AES com-
bined with Temporary Key Integrity Protocol (TKIP). This field has been pre-popu
-
lated with the option most complimentary to the Network Authentication selected.
WEP Encryption
[Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.
Encryption Strength
[128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more
robust option for security.
Current Network Key
[1-4] Select which of the four keys from the list is presently in effect.
Network Key 1-4
Enter up to four encryption keys using the on-screen instructions to achieve the de-
sired security strength (128 or 64 bit).
Page 93 / 117
Page 93
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
MAC Filter
Also known as Layer 2 address filtering, MAC Filtering refers to an access control methodology whereby the 48-bit address as
-
signed to each LAN host NIC is used to determine access to the network.
After selecting
Wireless -> MAC
Filter from the left navigation bar, select an SSID to filter from the drop-down list.
Next, select the
MAC Restrict Mode
(Disabled, Allow or Deny).
Use the
Add
button to add a MAC address to the filter list.
Click
Apply/Save
to commit the completed entry.
The individual fields on this screen are defined as follows:
Field Name
Description
Select SSID
Select the SSID to apply this MAC filter rule to.
MAC Restrict Mode
Disabled: MAC filtering is off.
Allow: For specified MAC address, access is permitted.
Deny: Access for the specified MAC address is rejected.
Page 94 / 117
Page 94
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Wireless Bridge
This page allows you to configure wireless bridge features of the wireless LAN interface. You can select
Wireless Bridge
(also
known as Wireless Distribution System) to disable access point functionality. Selecting
Access Point
enables access point func-
tionality. Wireless bridge functionality will still be available and wireless stations will be able to associate to the Access Point.
Selecting
Disabled
in Bridge Restrict will disable wireless bridge restriction. Any wireless bridge will be granted access. Select-
ing
Enabled
or
Enabled(Scan)
enables wireless bridge restriction. Only those bridges specified via their MAC address in Remote
Bridges will be granted access.
After selecting
Wireless -> Wireless Bridge
from the left navigation bar, enter your settings as desired.
Click
Refresh
to update the remote bridges. Wait for few seconds to update.
Click
Apply/Save
to commit your changes.
Page 95 / 117
Page 95
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
The individual fields on this screen are defined as follows:
Field Name
Description
AP Mode
[Wireless Bridge, Access Point] Select Wireless Bridge to disable Access Point func-
tionality. Select Access Point enables AP functionality. In Access Point mode, wire-
less bridge functionality will still be available and wireless stations will be able to
associate to the AP.
Bridge Restrict
[Enabled, Disabled] Optional setting to turn off wireless bridge restriction. When disa-
bled, any wireless bridge will be granted access. Choose Enabled or Enabled (Scan)
to turn on wireless bridge restriction. Only those bridges selected in the Remote
Bridges list will be granted access. Use the Refresh button to update the station list
when Bridge Restrict is enabled.
Remote Bridge MAC Address
Enter the MAC address(es) of the remote bridges to be allowed
Advanced
At
Wireless -> Advanced
you may configure advanced features of the wireless LAN interface. You can select a particular chan
-
nel on which to operate, force the transmission rate to a desired speed, set the fragmentation threshold, the RTS threshold, the
wakeup interval for clients in power-save mode, and more.
After selecting
Wireless -> Advanced
from the left navigation bar, enter your settings as desired.
Click
Apply/Save
to commit your changes.

Rate

4 / 5 based on 1 vote.

Popular SmartRG Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top