1. Home
    2. /
  2. Manuals
    3. /
  3. SmartRG
    4. /
  4. SR360n
    5. /
  5. 2
Page 6 / 12 Scroll up to view Page 1 - 5
QUICK GATEWAY CONFIGURATION
QUICK GATEWAY CONFIGURATION
The following screen appears. Wait while the Gateway automatically connects to
your service provider.
The following screen appears. Wait while the Gateway automatically connects to
your service provider.
When the connection is complete,
OK
will appear in green letters next to the
Network icon. Click the
Manage gateway (advanced)
link in the upper right. The
login dialogue will appear.
When the connection is complete,
OK
will appear in green letters next to the
Network icon. Click the
Manage gateway (advanced)
link in the upper right. The
login dialogue will appear.
3
2
3
Page 7 / 12
4
QUICK GATEWAY CONFIGURATION
QUICK GATEWAY CONFIGURATION
Manual Configuration of the WAN:
In the event that the automatic connect process is unsuccessful, refer to the
WAN
connection setup
chapter in the
User Guide
for this gateway to manually establish a
connection.
Manual Configuration of the WAN:
In the event that the automatic connect process is unsuccessful, refer to the
WAN
connection setup
chapter in the
User Guide
for this gateway to manually establish a
connection.
Note: In some cases, your service provider has other settings.
Please contact your provider for logon information
Note: In some cases, your service provider has other settings.
Please contact your provider for logon information
You may login with the
factory default credentials
shown below.
User Name:
admin
Password:
admin
Click the
Log In
button in
the lower right.
You may login with the
factory default credentials
shown below.
User Name:
admin
Password:
admin
Click the
Log In
button in
the lower right.
Page 8 / 12
1
2
3
QUICK GATEWAY CONFIGURATION
QUICK GATEWAY CONFIGURATION
WiFi Setup
Two methods are available for WiFi setup. Complete these first three steps then the
remaining steps for the specific method you desire.
1. From the left navigation bar, click
Wireless / Basic.
2. Check the
Enable Wireless
checkbox.
3. If desired, customize the
SSID
field to whatever network name you wish to have
your client devices connect to.
WiFi Setup
Two methods are available for WiFi setup. Complete these first three steps then the
remaining steps for the specific method you desire.
1. From the left navigation bar, click
Wireless / Basic.
2. Check the
Enable Wireless
checkbox.
3. If desired, customize the
SSID
field to whatever network name you wish to have
your client devices connect to.
Page 9 / 12
QUICK GATEWAY CONFIGURATION
QUICK GATEWAY CONFIGURATION
WPS Method
If the device you wish to connect to the internet via your SmartRG gateway
supports WPS secure WiFi connection method, you may follow these steps.
1. From the left navigation bar, click
Wireless / Security
2. Select the drop-down menu
Enable WPS.
Click the Apply/Save button to commit
your selection.
3. On the top of the gateway’s enclosure, press the button labeled
WPS
.
4. Within 2 minutes, activate
WPS
on your 3rd party device you wish to connect. It
may have a physical pushbutton on it’s exterior or possibly a software interface is
used to initiate WPS connection.
To learn how to use the WPS feature on your client device, refer to its documenta-
tion.
Your device should now be connected to your router wirelessly using WPS.
If you
encounter problems with the WPS setup such as
Connection Failure! Your client
device failed to connect to the network.
Refer back to your client device for further
instructions.
WPS Method
If the device you wish to connect to the internet via your SmartRG gateway
supports WPS secure WiFi connection method, you may follow these steps.
1. From the left navigation bar, click
Wireless / Security
2. Select the drop-down menu
Enable WPS.
Click the Apply/Save button to commit
your selection.
3. On the top of the gateway’s enclosure, press the button labeled
WPS
.
4. Within 2 minutes, activate
WPS
on your 3rd party device you wish to connect. It
may have a physical pushbutton on it’s exterior or possibly a software interface is
used to initiate WPS connection.
To learn how to use the WPS feature on your client device, refer to its documenta-
tion.
Your device should now be connected to your router wirelessly using WPS.
If you
encounter problems with the WPS setup such as
Connection Failure! Your client
device failed to connect to the network.
Refer back to your client device for further
instructions.
Page 10 / 12
QUICK GATEWAY CONFIGURATION
QUICK GATEWAY CONFIGURATION
Manual Method
Set up your Gateway’s parameters first, then:
1. From the left navigation bar, select
Wireless / Security
and scroll down to the
Manual Setup AP
section.
2. If your gateway supports multiple wireless networks, select the
SSID
of the
network you wish to configure.
3. Select your desired
Network Authentication
from the drop-down menu. Ensure
that the host devices you intend to use support your chosen authentication type.
4. Choose a
WPA Passphrase
and type it in to this field.
You’ll need this later when
setting up your client devices.
5. Select any desired
encryption preferences
in the lower three fields.
6. Click
Apply / Save
.
7. Follow the WiFi connection instructions provided with your client device(s) to
connect to the Router. When browsing for available networks, remember the
SSID
name
you established in Step 2. Enter the passphrase in the appropriate location at
the setup network setup screen of your WiFi client device.
Manual Method
Set up your Gateway’s parameters first, then:
1. From the left navigation bar, select
Wireless / Security
and scroll down to the
Manual Setup AP
section.
2. If your gateway supports multiple wireless networks, select the
SSID
of the
network you wish to configure.
3. Select your desired
Network Authentication
from the drop-down menu. Ensure
that the host devices you intend to use support your chosen authentication type.
4. Choose a
WPA Passphrase
and type it in to this field.
You’ll need this later when
setting up your client devices.
5. Select any desired
encryption preferences
in the lower three fields.
6. Click
Apply / Save
.
7. Follow the WiFi connection instructions provided with your client device(s) to
connect to the Router. When browsing for available networks, remember the
SSID
name
you established in Step 2. Enter the passphrase in the appropriate location at
the setup network setup screen of your WiFi client device.

Rate

4.5 / 5 based on 2 votes.

Popular SmartRG Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top