Page 32
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Click
Next
after completing the necessary fields.
The individual fields on this screen are defined as follows:
Field Name
Description
PPP Username:
Enter the Username required for authentication to the PPP server.
PPP Password:
Enter the Password required for authentication to the PPP server.
PPPoE Service Name:
(Optional)
Enter a description for this service.
Authentication Method
Select a means for authentication from the drop-down list.
[AUTO] Attempt to AUTO detect handshake protocol in list below.
[PAP] Password Authentication Protocol (plaintext passwords)
[CHAP] Challenge Handshake Authentication Protocol. (MD5 hashing scheme on passwords)
[MSCHAP] Microsoft Challenge Handshake Authentication Protocol. (Microsoft encrypted
password authentication protocol)
CP Keepalive Period
The frequency with which the keepalive packet is sent by the gateway to the PPP server.
LCP Retry Threshold
In the event that the PPP server does not respond to the Keepalive, how many additional at-
tempted packets will the gateway send before giving up and declaring the connection, Failed.
Dial on Demand
[1-4320] Enables Inactivity Timeout (minutes). Default = 0 (not applicable.)
Connection automatically starts when there is outbound traffic to the Internet. It automati
-
cally terminates if the connection is idle based on the value in the Idle Timeout setting.
PPP IP Extension
Forward all traffic to Advanced DMZ IP specified in the next field.
Advanced DMZ
Only applicable if PPP IP extension is selected. Specify IP to forward traffic PPPoE traffic to.
Use Static IPv4 Address
Specify IPv4 Address to apply to WAN service.
Retry PPP password on
authentication error
[1-65536]
Max PPP authentication retries on failure. (65536=Forever)
Enable PPP Debug Mode
The system will put more PPP connection information into the system log of the device. This is
for debugging errors and not for normal usage.
Bridge PPPoE Frames Be-
tween WAN and Local Ports
PPPoE passthrough to relay PPPoE connections from behind the modem. Also known as Half-
Bridged mode.
Enable Firewall
Enables functions in the Security sub-menu
Enable NAT
Enable sharing the WAN interface across multiple devices on the LAN. Also enables the func-
tions in the NAT sub-menu and addition PPPoE NAT features to select.
19216811.live