If you still wish to visit this webpage click on ‘proceed anyway’. Alternatively click ‘Back

to Safety’ so that your

security will not be breached.

Configuring Sitecom Cloud Security

If you wish to change your security options or to extend your subscription at any time,

open

http://www.sitecomcloudsecurity.com

from your web browser.

You will be asked for a username and password. These can be found on the backlabel on

the bottom of your Sitecom router or modem.

If the login succeeded you can click on ‘Settings’ to change your security options.

Or click ‘License’ to renew your subscription.

Disabling Sitecom Cloud Security

If you wish to disable to Sitecom cloud security at any time, open the webpage of your

Sitecom product and log in with the supplied credentials (these can be found on the back

label on the bottom of your Sitecom device).

Go to Toolbox and select “Sitecom Cloud Security”.

Click the “Disable” radio button and click ‘

Apply’

for the settings to take effect.

Password

You can change the password required to log into the router's system web-based

management. Passwords can contain 0 to 12 alphanumeric characters, and are case

sensitive.



Current Password

: Fill in the current password to allow changing to a new

password.



New Password

: Enter your new password.



Confirmed Password

: Enter your new password again for verification purposes.

Click

Apply

at the bottom of the screen to save the above configuration.

Time Zone

The Time Zone allows your router to base its time on the settings configured here, which

will affect functions such as Log entries and Firewall settings.



Set Time Zone

: Select the time zone of the country you are currently in. The

router will set its time based on your selection.



Time Server Address:

You can set an NTP server address.



Enable Daylight Savings

: The router can also take Daylight savings into

account. If you wish to use this function, you must check/tick the enable boxto

enable your daylight saving configuration (below).



Start Daylight Savings Time

: Select the period in which you wish to start

daylight Savings Time.



End Daylight Savings Time

: Select the period in which you wish to end daylight

Savings Time.

Click

Apply

at the bottom of the screen to save the above configuration.

Remote Management

The remote management function allows you to designate a host in the Internet the

ability to configure the Broadband router from a remote site. Enter the designated host

IP Address in the Host IP Address field.



Host Address

: This is the IP address of the host in the Internet that will have

management/configuration access to the Broadband router from a remote site. If

the Host Address is left 0.0.0.0 this means anyone can access the router’s web

-

based configuration from a remote location, providing they know the password.



Port

: The port number of the remote management web interface.



Enabled

:

Select “Enabled” to enable

the remote management function.

Click

Apply

at the bottom of the screen to save the above configuration.

Firmware Upgrade

Enable automatic firmware update

: When enabled the router will periodically check if

a new firmware is available. If a new firmware is detected the router will give a

notification.

Firmware Upgrade

:

This tool allows you to upgrade the Broadband router’s system

firmware. To upgrade the firmware of your Broadband router, you need to download the

firmware file to your local hard disk, and enter that file name and path in the appropriate

field on this page. You can also use the Browse button to find the firmware file on your

PC.

Once you’ve selecte

d the new firmware file, click

Apply

at the bottom of the screen to

start the upgrade process.

Backup Settings

The Backup screen allows you to save (Backup) the current configuration settings. When

you save the configuration setting (Backup) you can re-load the saved configuration into

the router through the Restore selection. If extreme problems occur you can use the

Restore to Factory Defaults selection, this will set all configurations to its original default

settings (e.g. when you first purchased the router).