Page 56 / 69
Scroll up to view Page 51 - 55
E
|
3
Or click ‘License’ to renew your subscription.
If you wish to disable to Sitecom cloud security at any time, open the webpage
of your Sitecom product and log in with the supplied credentials (these can be
Page 57 / 69
E
|
3
found on the back label on the bottom of your Sitecom device).
Go to Toolbox and select “Sitecom Cloud Security”.
Click the “Disable” radio button and click ‘Apply’ for the settings to take effect.
Page 58 / 69
E
|
3
Password change options
You can change the password required to log into the broadband router's
system web-based management. Passwords can contain 0 to 12 alphanumeric
characters, and are case sensitive.
Current Password
Fill in the current password to allow changing to a new
password.
New Password
Enter your new password.
Confirmed Password
Enter your new password again for verification
purposes.
Click <
Apply
> at the bottom of the screen to save the above configurations
Page 59 / 69
E
|
3
Time Zone
The Time Zone allows your router to base its time on the settings configured
here, which will affect functions such as Log entries and Firewall settings.
Set Time Zone
Select the time zone of the country you are currently in. The
router will set its time based on your selection.
Time Server Address
You can set an NTP server address.
Enable Daylight Savings
The router can also take Daylight savings into
account. If you wish to use this function, you must check/tick the enable box
to enable your daylight saving configuration (below).
Start Daylight Savings Time
Select the period in which you wish to start
daylight Savings Time
End Daylight Savings
Time Select the period in which you wish to end
daylight Savings Time
Click <
Apply
> at the bottom of the screen to save the above configurations
Page 60 / 69
E
|
3
Remote Management
The remote management function allows you to designate a host in the
Internet the ability to configure the Broadband router from a remote site.
Enter the designated host IP Address in the Host IP Address field.
Host Address
This is the IP address of the host in the Internet that will have
management/configuration access to the Broadband router from a remote
site. If the Host Address is left 0.0.0.0 this means anyone can access the
router’s web-based configuration from a remote location, providing they know
the password.
Port
The port number of the remote management web interface.
Enabled
Select “
Enabled
” to enable the remote management function.
Click <
Apply
> at the bottom of the screen to save the above configurations.
19216811.live