Page 51 / 61
Scroll up to view Page 46 - 50
The software is now ready to be installed, Click
Install
to continue.
Once the installation is finished the software will inform you. If
“
Launch Sitecom USB
Device Server
”
checked the software will automatically be launched after you clicked
Finish
.
Page 52 / 61
MacOS
Insert the CD-ROM that was included with your router and select
“
Install
”
from the cd-
menu.
Click
Install
to continue installation.
Enter your Mac username and password and click
OK
to continue.
Once the installation is finished the software will inform you and requires to restart the
system.
Page 53 / 61
Connect & Disconnect
“NetUSB” allows you to use USB printers when they’re actually connected to the Sitecom
USB server.
The “connect” operation is a software operation that simulates an actual USB device
plug-
in. Therefore, when you do a “connect” operation in the Control Center, the PC can
detect a USB device’s plug
-in, although actually you do not plug in any USB device to
your PC. Similarly, the “disconnect” operation is a software operation that simulates the
disconnection of the USB device.
Note
:
If a USB device is “connected” by a PC, we say that PC has the ownership of the
USB device. Only one PC can get the ownership of a USB device at the same time.
Page 54 / 61
NetUSB installation
The steps to do installation for USB devices, like MFPs:
Make sure the router is turned on.
Connect the USB device to the USB port of the router.
Run the Control Center. In the “USB MFP Server List”
window, you can see
the host names and IP addresses all of the Sitecom servers (in blue) on the
network, as shown below.
Click the server. Then all USB devices attached to the server will be shown.
Please follow the user manual of the USB device to install its driver. For
example, you may put the driver CD of the USB device in the CD-ROM player
to install the driver.
When you are asked to plug in the USB device into PC’s USB port, click the
desired USB device in the Control Center and then click the
“Auto
-Connect
Printer” button to do the connect operation and get the ownership of the USB
device. The computer name of the device owner will be shown at the end of
the device.
Page 55 / 61
PC will automatically detect that the USB device is plugged-in. On the right
side of the Windows Task Bar, you can see the information of the new device.
Continue to follow the user manual of the USB device to do the rest jobs of
installation, until the driver installation has finished.
After the installation, you can see the newly created devices on the PC. If the USB device
is a MFP, you can see a new printer and a new scanner from the “Control Panel”.
19216811.live