1. Home
    2. /
  2. Manuals
    3. /
  3. Sitecom
    4. /
  4. WL-350
    5. /
  5. 5
Page 21 / 74 Scroll up to view Page 16 - 20
-
Mode
: The transmission standard being used by the client. Values are
11a, 11b, 11g, or 11n for 802.11a, 802.11b, 802.11g, or 802.11n
respectively.
-
Rate
: The actual transmission rate of the client in megabits per second.
-
Signal
: This is a relative measure of signal quality. The value is
expressed as a percentage of theoretical best quality. Signal quality can
be reduced by distance, by interference from other radio-frequency
sources (such as cordless telephones or neighboring wireless networks),
and by obstacles between the router and the wireless device.
WISH
The WISH Sessions page displays full details of active local wireless sessions
through your router when WISH has been enabled. A WISH session is a
conversation between a program or application on a wirelessly connected
LAN-side computer and another computer, however connected.
-
Originator
: The IP address and, where appropriate, port number of the
computer that originated a network connection.
-
Target
: The IP address and, where appropriate, port number of the
computer to which a network connection has been made.
-
Protocol
: The communications protocol used for the conversation.
-
State
: State for sessions that use the TCP protocol.
o
NO
: None -- This entry is used as a placeholder for a future
connection that may occur.
o
SS
: SYN Sent -- One of the systems is attempting to start a
connection.
o
EST: Established -- the connection is passing data.
o
FW
: FIN Wait -- The client system has requested that the connection
be stopped.
o
CW
: Close Wait -- the server system has requested that the
connection be stopped.
o
TW
: Time Wait -- Waiting for a short time while a connection that was
in FIN Wait is fully closed.
o
LA
: Last ACK -- Waiting for a short time while a connection that was in
Close Wait is fully closed.
o
CL
: Closed -- The connection is no longer active but the session is
being tracked in case there are any retransmitted packets still pending.
-
Priority
: The priority given to packets sent wirelessly over this
conversation by the WISH logic. The priorities are:
o
BK
: Background (least urgent).
o
BE
: Best Effort.
o
VI
: Video.
o
VO
: Voice (most urgent).
Page 22 / 74
-
Time
Out
: The number of seconds of idle time until the router considers
the session terminated. The initial value of Time Out depends on the type
and state of the connection.
o
300 seconds
- UDP connections.
o
240 seconds
- Reset or closed TCP connections. The connection does
not close instantly so that lingering packets can pass or the connection
can be re-established.
o
7800 seconds
- Established or closing TCP connections.
Logs
Click on the
Logs
link in the navigation menu. The router automatically logs
(records) events of possible interest in its internal memory. If there is not enough
internal memory for all events, logs of older events are deleted, but logs of the
latest events are retained. The Logs option allows you to view the router logs.
You can define what types of events you want to view and the level of events to
view. This router also has external Syslog Server support so you can send the log
files to a computer on your network that is running a Syslog utility.
-
What to View
: Select the features of which you would like to view the
logs: Firewall & Security, System, or Router Status.
-
View Levels
: Select the warning levels for the logs: Critical, Warning, or
Informational.
-
Click on the
Apply Log Settings Now
to make the new log effective.
Page 23 / 74
Stats
Click on the
Statistics
link in the navigation menu. This page displays the
transmitted and received packet statistics of the wired (LAN & WAN) and wireless
interface.
Click on the Refresh button to refresh the statistics.
Page 24 / 74
DHCP
Click on the
DHCP
link in the navigation menu. This page displays the routing
details configured for your router.
°
Local
: The IP address and, where appropriate, port number of the local
application.
°
NAT
: The port number of the LAN-side application as viewed by the WAN-side
application.
°
Internet
: The IP address and, where appropriate, port number of the
application on the Internet.
°
Protocol
: The communications protocol used for the conversation.
°
State
: State for sessions that use the TCP protocol.
o
NO
: None -- This entry is used as a placeholder for a future
connection that may occur.
o
SS
: SYN Sent -- One of the systems is attempting to start a
connection.
o
EST: Established -- the connection is passing data.
o
FW
: FIN Wait -- The client system has requested that the connection
be stopped.
o
CW
: Close Wait -- the server system has requested that the
connection be stopped.
o
TW
: Time Wait -- Waiting for a short time while a connection that was
in FIN Wait is fully closed.
o
LA
: Last ACK -- Waiting for a short time while a connection that was in
Close Wait is fully closed.
o
CL
: Closed -- The connection is no longer active but the session is
being tracked in case there are any retransmitted packets still pending.
°
Priority
: The priority given to packets sent wirelessly over this conversation
by the WISH logic. The priorities are:
o
BK
: Background (least urgent).
o
BE
: Best Effort.
o
VI
: Video.
o
VO
: Voice (most urgent).
Page 25 / 74
°
Time
Out
: The number of seconds of idle time until the router considers the
session terminated. The initial value of Time Out depends on the type and
state of the connection.
o
300 seconds
- UDP connections.
o
240 seconds
- Reset or closed TCP connections. The connection does
not close instantly so that lingering packets can pass or the connection
can be re-established.
o
7800 seconds
- Established or closing TCP connections.
Firewall
Click on the
Firewall
link in the navigation menu. This page displays the details
about firewall holes in your router.

Rate

4.5 / 5 based on 2 votes.

Popular Sitecom Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top