16

LAN settings

The LAN tab gives you the opportunity to change the IP settings of the WL-

340/341/342.

Click

<Apply>

at the bottom of this screen to save any changes.

IP address

192.168.0.1. It is the router’s LAN IP address (Your LAN clients default

gateway IP address).

IP Subnet Mask

255.255.255.0 Specify a Subnet Mask for your LAN segment.

802.1d Spanning Tree

is Disabled by default. If the 802.1d Spanning Tree

function is enabled, this router will use the spanning tree protocol to prevent

network loops.

DHCP Server

Enabled by default. You can enable or disable the DHCP server.

When DHCP is disabled no ip-addresses are assigned to clients and you have to

use static ip-addresses. When DHCP server is enabled your computers will be

assigned an ip-address automatically until the lease time expires.

17

Lease Time

Forever. In the Lease Time setting you can specify the time period

that the DHCP lends an IP address to your LAN clients. The DHCP will change

your LAN client’s IP address when this time threshold period is reached.

IP Address Pool

You can select a particular IP address range for your DHCP

server to issue IP addresses to your LAN Clients.

Note

:

default IP range 192.168.0.100

°±

192.168.0.200. If you want your PC(s) to have a

static/fixed IP address, then you’ll have to choose an IP address outside this IP address Pool

Domain Name

You can specify a Domain Name for your LAN. Or just keep the

default (sitecomwl34x).

18

Device Status

View the Broadband router’s current configuration settings. Device Status displays

the configuration settings you’ve configured in the Wizard / Basic Settings /

Wireless Settings section.

19

Internet Status

This page displays whether the WAN port is connected to a Cable/DSL connection.

It also displays the router’s WAN IP address, Subnet Mask, and ISP Gateway as

well as MAC address, the Primary DNS. Press

Renew

button to renew your WAN

IP address.

20

DHCP Client Status

DHCP

This page shows all DHCP clients (LAN PCs) currently connected to your

network. The table shows the assigned IP address, MAC address and expiration

time for each DHCP leased client. Use the Refresh button to update the available

information.

You can check

Enable Static DHCP IP

. It is possible to add more static DHCP IPs.

They are listed in the table

Current Static DHCP Table

. IP can be deleted at will

from the table.

Click

apply

button to save the changed configuration.