Sitecom WL-342v2 Router Manual PDF (Setup & Configuration Guide)

Page 46 / 61 Scroll up to view Page 41 - 45

46

Applications selection. Once you have selected an application, select a

location (1-10) in the Copy to selection box and then click the Copy to button.

This will automatically list the Public Ports required for this popular application

in the location (1-10) you specified.

Add Special Application

Fill in the "Trigger Port", "Trigger Type”, “Public

Port”, "Public Type", "Public Port" and "Comment" of the setting to be added

and then click "Add". The Special Application setting will be added into the

"Current Trigger-Port Table" below. If you happen to make a mistake, just

click "Clear" and the fields will be cleared.

Remove

If you want to remove Special Application settings from the "Current

Trigger-Port Table", select the Special Application settings you want to

remove in the table and then click "Delete Selected". If you want remove all

Special Application settings from the table, just click the "Delete All" button.

Click "Reset" will clear your current selections.

Page 47 / 61

47

ALG

You can select applications that need “Application Layer Gateway” support.

Enable

select enable “Application Layer Gateway”, then the router will let

the

selected application correctly pass through the NAT gateway.

Page 48 / 61

48

UPNP

With UPnP, all PCs in you Intranet will discover this router automatically, so

you don’t have to configure your PC and it can easily access the Internet

through this router.

UPnP Feature

You can enable or Disable the UPnP feature here. After you

enable the UPnP feature, all client systems that support UPnP, like Windows

XP, can discover this router automatically and access the Internet through

this router without having to configure anything. The NAT Traversal function

provided by UPnP can let applications that support UPnP connect to the

internet without having to configure the virtual server sections.

Page 49 / 61

49

QoS

QoS can let you classify Internet application traffic by source/destination IP

address and port number. You can assign priority for each type of application

and reserve bandwidth for it. The packets of applications with higher priority

will always go first. Lower priority applications will get bandwidth after higher

priority applications get enough bandwidth. This can let you have a better

experience in using critical real time services like Internet phone, video

conference …etc. All the applications not specified by you are classified as rule

name “Others”. The rule with a smaller priority number has a higher priority;

the rule with a larger priority number has a lower priority. You can adjust the

priority of the rules by moving them up or down.

Enable/Disable

QoS

You can check “Enable QoS” to enable QoS

functionality for the WAN port.

Add a QoS rule into the table

Click “Add” then enter a form of the QoS

rule. Click “Apply” after filling out the form the rule will be added into the

table.

Remove QoS rules from the table

If you want to remove QoS rules from

the table, select the QoS rules you want to remove in the table and then click

"Delete Selected". If you want remove all QoS rules from the table, just click

the "Delete All" button. Clicking "Reset" will clear your current selections.

Page 50 / 61

50

Edit a QoS rule

Select the rule you want to edit and click “Edit”, then enter

the detail form of the QoS rule. Click “

Apply

” after editing the form and the

rule will be saved.

Adjust QoS rule priority

You can select the rule and click “Move Up” to

make its priority higher. You also can select the rule and click “Move Down” to

make its priority lower.

Rate

Popular Sitecom Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share