Page 16 / 57 Scroll up to view Page 11 - 15
16
Device Status
View the Broadband modem/router’s current configuration settings. Device
Status displays the configuration settings you’ve configured in the Wizard /
Basic Settings / Wireless Settings section.
Page 17 / 57
17
Internet Status
This page displays whether the ADSL port is connected to a ADSL service
provider. It also displays the router’s WAN IP address, Subnet Mask, and ISP
Gateway as well as MAC address, the Primary DNS. Press
Renew
button to
renew your WAN IP address.
Page 18 / 57
18
ADSL Status
This page shows the current operation mode, status of your ADSL connection, the
data rate and the quality of your ADSL link.
Operation mode
allows manual selection of the ADSL mode.
Page 19 / 57
19
DHCP Client Status
DHCP
This page shows all DHCP clients (LAN PCs) currently connected to your
network. The table shows the assigned IP address, MAC address and expiration
time for each DHCP leased client.
Use the
Refresh
button to update the available information.
Page 20 / 57
20
WL-322 Log
View the operation
log of WL-322
. This page shows the current system log of
the Broadband modem/router. It displays any event occurred after system start
up. At the bottom of the page, the system log can be saved
<Save>
to a local
file for further processing or the system log can be cleared
<Clear>
or it can be
refreshed
<Refresh>
to get the most updated information. When the system is
powered down, the system log will disappear if not saved to a local file.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top