Page 51 / 60
Scroll up to view Page 46 - 50
51
Time Zone
The Time Zone allows your router to base its time on the settings configured
here, which will affect functions such as Log entries and Firewall settings.
Set Time Zone
Select the time zone of the country you are currently in. The
router will set its time based on your selection.
Time Server Address
You can set an NTP server address.
Enable Daylight Savings
The router can also take Daylight savings into
account. If you wish to use this function, you must check/tick the enable box
to enable your daylight saving configuration (below).
Start Daylight Savings Time
Select the period in which you wish to start
daylight Savings Time
End Daylight Savings
Time Select the period in which you wish to end
daylight Savings Time
Click <
Apply
> at the bottom of the screen to save the above configurations
Page 52 / 60
52
Remote Management
The remote management function allows you to designate a host in the
Internet the ability to configure the Broadband router from a remote site.
Enter the designated host IP Address in the Host IP Address field.
Host Address
This is the IP address of the host in the Internet that will have
management/configuration access to the Broadband router from a remote
site. If the Host Address is left 0.0.0.0 this means anyone can access the
router’s web-based configuration from a remote location, providing they know
the password.
Port
The port number of the remote management web interface.
Enabled
Select “
Enabled
” to enable the remote management function.
Click <
Apply
> at the bottom of the screen to save the above configurations.
Page 53 / 60
53
Firmware Upgrade
This page allows you to upgrade the router’s firmware.
Firmware Upgrade
This tool allows you to upgrade the Broadband router’s
system firmware. To upgrade the firmware of your Broadband router, you
need to download the firmware file to your local hard disk, and enter that file
name and path in the appropriate field on this page. You can also use the
Browse button to find the firmware file on your PC.
Once you’ve selected the new firmware file, click <
Apply
> at the bottom of
the screen to start the upgrade process
Page 54 / 60
54
Backup Settings
The Backup screen allows you to save (Backup) the router’s current
configuration settings. When you save the configuration setting (Backup) you
can re-load the saved configuration into the router through the Restore
selection. If extreme problems occur you can use the Restore to Factory
Defaults selection, this will set all configurations to its original default settings
(e.g. when you first purchased the router).
Use the "Backup" tool to save the Broadband router current configuration to a
file named "
config.bin
" on your PC. You can then use the "Restore" tool to
restore the saved configuration to the Broadband router. Alternatively, you
can use the "Restore to Factory Defaults" tool to force the Broadband router
to perform a power reset and restore the original factory settings.
Page 55 / 60
55
Reset
You can reset the router’s system should any problem exist. The reset
function essentially re-boots your router’s system.
19216811.live