Page 66 / 73
Scroll up to view Page 61 - 65
WL-308 Gaming Router
Full Manual
66
Firmware
Click on the
Firmware
link in the navigation menu. This page allows you to
upgrade the firmware of the device in order to improve the functionality and
performance. This page also displays the current firmware version and its release
date.
Ensure that you have downloaded the appropriate firmware from the vendor’s
website. Connect the device to your PC using an Ethernet cable, as the firmware
cannot be upgraded using the wireless interface.
Click on the
Browse
button to select the firmware and then click on the
Upload
button.
Syslog
Logs display a list of events that are triggered on the Ethernet and Wireless
interface. This log can be referred when an unknown error occurs on the system
or when a report needs to be sent to the technical support department for
debugging purposes
Page 67 / 73
WL-308 Gaming Router
Full Manual
67
°
Enable Logging to a Syslog Server:
Place a check in this box to enable
Syslog logging.
°
Syslog Server IP Address:
Specify the IP address of the Syslog server.
Click on the
Apply
button once you have modified the settings.
Administrator Settings
Admin Password
You can change the password required to log into the broadband router's system
web-based management. By default, the password is: “admin”. Passwords can
contain 0 to 12 alphanumeric characters, and are case sensitive.
Username
: Fill in the current username (default: admin).
Password
: Enter your new password.
Verify Password
: Enter your new password again for verification purposes.
Page 68 / 73
WL-308 Gaming Router
Full Manual
68
System Name
Gateway Name
: Name of your router.
Remote Management
The remote management function allows you to configure the Broadband router
from a remote site.
Inactivity Time Out
: Time after which you will be automatically logged out of
the web-interface.
Enable Remote Management
: Select “Enabled” to enable the remote
management function.
Remote Admin Port
: The port number of the remote management web
interface.
Click
Apply
at the top of the screen to save the above configurations.
Page 69 / 73
WL-308 Gaming Router
Full Manual
69
Appendix A – Specifications
Hardware Summary
Physical
Interface
°
WAN: One 10/100/1000 Gigabit RJ-45
°
LAN: Four 10/100/1000 Gigabit RJ-45
°
Reset Button (1 second for Reboot, 5 second for
Reset to Factory Default )
°
Power Jack
°
JTAG (for debug only)
LED Status
°
Power/ Status
°
WAN (Internet connection)
°
LAN1~LAN4 (10/100/1000Mbps)
°
WLAN (Wireless Connection)
Power
Requirements
°
Power Supply: 90 to 240 VDC ± 10
％
(depends on
different countries)
°
Device: 12 V/ 1.25A
Radio Specifications
Frequency Band
2.400
～
2.484 GHz
Media Access
Protocol
Carrier sense multiple access with collision avoidance
(CSMA/CA)
Modulation
Technology
OFDM: BPSK, QPSK, 16-QAM, 64-QAM
DBPSK, DQPSK, CCK
Operating
Channels
11 for North America, 14 for Japan, 13 for Europe
Receive
Sensitivity
(Typical)
°
2.412~2.472G(IEEE802.11b) (1Rx)
-93dBm @ 1Mbps
-91dBm @ 11Mbps
°
2.412~2.472G(IEEE802.11g) (2Rx)
-92dBm @ 6Mbps
-79dBm @ 54Mbps
°
2.412~2.472G(IEEE802.11N) (2Rx)
-90 dBm MCS 8
-70 dBm MCS 15
Available transmit
power
°
2.412~2.472G(IEEE802.11b)
19dBm @1~11Mbps
°
2.412~2.472G(IEEE802.11g)
Page 70 / 73
WL-308 Gaming Router
Full Manual
70
19 dBm @6Mbps
16 dBm @54Mbps
°
2.412~2.472G(IEEE802.11N)
20 dBm MCS 8
16 dBm MCS 15
Antenna Gain
°
Peak Gain = 2 dBi
°
Average Gain = 1.08 dBi (@ 2.45GHz, H-Plan)
Router and Gateway
Topology
Infrastructure
Operation Mode
AP/ Router/ WDS Bridge
LAN
°
DHCP Server
°
Static IP
°
DNS
°
UPnP
WAN
°
Static IP
°
DHCP Client
°
PPPoE
°
PPTP
°
Clone MAC
°
DNS Relay
°
DDNS-8 Verified Services
Router
°
NAT/ NAPT
°
Static Routing- RIPv2
°
Dynamic Route
°
Virtual server mapping
°
IP address mapping
°
Port Forwarding
°
Port Triggering
°
MAC address Filtering
°
ALG(Application Layer Gateway) support
(RTP/RTSP, AOL, FTP, ICMP, WMP/MMS,
NetMeeting, SIP)
Firewall
°
Blocking Ping
°
ICMP Blocking
19216811.live