Page 46 / 60 Scroll up to view Page 41 - 45
46
ALG
You can select applications that need “Application Layer Gateway” support
Enable
select enable “Application Layer Gateway”, then the router will let
the
selected application to correctly pass through the NAT gateway.
Page 47 / 60
47
UPNP
With UPnP, all PCs in you Intranet will discover this router automatically. So,
you don’t have to configure your PC and it can easily access the Internet
through this router.
UPnP Feature Disable
You can enable or Disable the UPnP feature here.
After you enable the UPnP feature, all client systems that support UPnP, like
Windows XP, can discover this router automatically and access the Internet
through this router without having to configure anything. The NAT Traversal
function provided by UPnP can let applications that support UPnP connect to
the internet without having to configure the virtual server sections.
Page 48 / 60
48
QoS
QoS can let you classify Internet application traffic by source/destination IP
address and port number. You can assign priority for each type of application
and reserve bandwidth for it. The packets of applications with higher priority
will always go first. Lower priority applications will get bandwidth after higher
priority applications get enough bandwidth. This can let you have a better
experience in using critical real time services like Internet phone, video
conference …etc. All the applications not specified by you are classified as rule
name “Others”. The rule with a smaller priority number has a higher priority;
the rule with a larger priority number has a lower priority. You can adjust the
priority of the rules by moving them up or down.
Enable/Disable
QoS
You can check “Enable QoS” to enable QoS
functionality for the WAN port.
Add a QoS rule into the table
Click “Add” then enter a form of the QoS
rule. Click “Apply” after filling out the form the rule will be added into the
table.
Remove QoS rules from the table
If you want to remove QoS rules from
the table, select the QoS rules you want to remove in the table and then click
"Delete Selected". If you want remove all QoS rules from the table, just click
the "Delete All" button. Clicking "Reset" will clear your current selections.
Page 49 / 60
49
Edit a QoS rule
Select the rule you want to edit and click “Edit”, then enter
the detail form of the QoS rule. Click “
Apply
” after editing the form and the
rule will be saved.
Adjust QoS rule
priority You can select the rule and click “Move Up” to make
its priority higher. You also can select the rule and click “Move Down” to make
its priority lower.
Page 50 / 60
50
14
TOOLBOX Settings
Password change options
You can change the password required to log into the broadband router's
system web-based management. By default, the password is: admin.
Passwords can contain 0 to 12 alphanumeric characters, and are case
sensitive.
Current Password
Fill in the current password to allow changing to a new
password.
New Password
Enter your new password
Confirmed Password
Enter your new password again for verification
purposes
Click <
Apply
> at the bottom of the screen to save the above configurations

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top