Page 51 / 57
Scroll up to view Page 46 - 50
51
6.
The TCP/IP protocol shall be listed in the Network window. Click
OK
to complete the
install procedure and restart your PC to enable the TCP/IP protocol.
A.2 Set TCP/IP Protocol for Working with NAT Router
1.
Click
Start
button and choose
Settings
, then click
Control Panel
.
2.
Double click
Network
icon. Select the TCP/IP line that has been associated to your
network card in the
Configuration
tab of the Network window.
Page 52 / 57
52
3.
Click
Properties
button to set the TCP/IP protocol for this NAT Router.
4.
Now, you have two setting methods:
Page 53 / 57
53
a.
Select
Obtain an IP address automatically
in the IP Address tab.
b.
Don’t input any value in the Gateway tab.
Page 54 / 57
54
c.
Choose
Disable DNS
in the DNS Configuration tab.
B.
Configure IP manually
a.
Select
Specify an IP address
in the IP Address tab. The default IP address of
between 1 and 253) for IP Address field and 255.255.255.0 for Subnet Mask
field.
Page 55 / 57
55
b.
In the Gateway tab, add the IP address of this product (default IP is
192.168.123.254) in the New gateway field and click
Add
button.
c.
In the DNS Configuration tab, add the DNS values which are provided by the
19216811.live