34
Before a new model device is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the SAR limit established by the FCC. Tests for each model
wireless mobile device are performed in positions and locations
(e.g. at the ear and worn on the body) as required by the FCC. For
body-worn operation, this device has been tested and meets FCC
RF exposure guidelines when used with an accessory that
contains no metal and that positions the wireless mobile device a
minimum of 1.0 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines. The FCC has granted an Equipment
Authorization for this mobile wireless device with all reported
SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this wireless mobile
device as reported to the FCC is:
•
Body
: 1.22 W/kg.
SAR information on this and other model devices can be
accessed online on the FCC's website through
http://
transition.fcc.gov/oet/rfsafety/sar.html
. To find information that
pertains to a particular model device, this site uses the device
FCC ID number which is usually printed somewhere on the case
of the device. Sometimes it may be necessary to remove the
battery pack to find the number. Once you have the FCC ID
number for a particular device, follow the instructions on the
website and it should provide values for typical or maximum SAR
for a particular device. Additional SAR information can also be
obtained at
telephones
.
FCC Part 15 Information to User
Pursuant to part 15.21 of the FCC Rules, you are cautioned that
changes or modifications not expressly approved by Samsung
could void your authority to operate the device.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be