208
(inner or outer pair) are in use on your phone line. Specifying
tip_ring
forces the inner pair
to be used; and
A_A1
the outer pair.
set dmt metallic-termination [ auto | disabled | always_on ]
(not supported on all models) This command allows you to apply a sealing current to “dry”
DSL lines so that the wiring doesn’t corrode.
•
auto
- The device will scan for standard telephone service (POTS). If it finds POTS, it dis-
ables metallic termination. If it does not find POTS during the search period, then metal-
lic termination is enabled.
•
disabled
- There is no POTS detection, and metallic termination is disabled.
•
always_on
- The device will scan for POTS for information only. Metallic termination is
always enabled.
Domain Name System Settings
Domain Name System (DNS) is an information service for TCP/IP networks that uses a
hierarchical naming system to identify network domains and the hosts associated with
them. You can identify a primary DNS server and one secondary server.
Common Commands
set dns domain-name
domain-name
Specifies the default domain name for your network. When an application needs to resolve
a host name, it appends the default domain name to the host name and asks the DNS
server if it has an address for the “fully qualified host name.”
set dns primary-address
ip_address
Specifies the IP address of the primary DNS name server.
set dns proxy-enable
This allows you to disable the default behavior of acting as a DNS proxy. The default is
on
.
19216811.live