Qualcomm Mobile-Station Router Manual PDF (Setup & Configuration Guide)

Page 21 / 37 Scroll up to view Page 16 - 20

21

Click

Refresh

to update the wireless information.

NOTE:

The parameter “Global Access” have several values:

1.

HOME

: Registered on the network of Verizon Wireless.

2.

EXTENDED NETWORK

: Registered on the network of other operators.

3.

INTERNATIONAL

: Roaming outside the USA.

4.

ROAMING

: Roaming.

Network Select

Select

WAN Settings

→

Network Select

to access:

z

Global

: Device will automatically register to valid wireless network.

z

GSM

: Device will register to GSM network only.

z

CDMA

: Device will register to CDMA network only.

WAN Connection Mode

Select

WAN Settings

→

WAN Connection Mode

to access:

There are three connection modes:

1.

Auto Connect (Domestic Only)

:

When registered on CDMA/EVDO network of the United States, the

Page 22 / 37

22

device will automatically connect to WAN when it is powered on.

2.

Auto Connect (GlobalAccess Mode)

: The device will automatically connect to WAN when it is powered on

no matter on which network it is registered.

3.

Manual Connect

: Connect/Disconnect to Internet manually.

Click

Apply

to confirm your configuration

Hotspot

LAN

Select

Hotspot

→

LAN

to access:

z

IP Address

: IP address for LAN interface.

z

Subnet Mask

: Subnet mask for the IP address.

z

MAC Address

: MAC address for the LAN interface.

z

DHCP Server:

Enable/Disable DHCP server function.

z

DHCP IP Pool

: Allocate start and end IP address for IP pool.

z

DHCP Lease Time

: Define how long the leased IP address will be expired, and will relocate new IP

address.

DHCP Clients

Select

Hotspot

→

DHCP Clients

to access:

Click

Refresh

to update DHCP Clients.

Page 23 / 37

23

Wi-Fi Settings

Connected Devices

Select

Wi-Fi Settings

→

Connected Devices

to access:

Basic

Select

Wi-Fi Settings

→

Basic

to access:

z

Network Mode

:

If all of the wireless devices connect with this device in the same transmission mode,

performance will be improved by choosing the appropriate wireless mode.

z

Network Name(SSID)

: Service Set Identifier(SSID). Enter a string less than 32 characters as the name

for your wireless local area network(WLAN).

z

Broadcast Network Name(SSID)

: Disable or Enable(Default) this function. If

Enable

is selected, the

device broadcasts the SSID, and other devices can search and connect to it. When you select

Disable

,

other devices can not search out the SSID. If you want someone to connect, you need tell them the SSID,

and let them to setup manually.

z

AP Isolation

: When

Enable

is selected, each of your wireless clients will not be able to communicate

with each other.

z

Country Code

: Choose the right country code.

z

Frequency(Channel)

: Choose the appropriate channel to optimize the performance and coverage of your

wireless network.

z

Maximum connected Wi-Fi devices:

Choose the maximum number of the stations which connect the AP

simultaneously.

Click

Apply

to confirm your configuration, or click

Cancel

to cancel your configuration.

Security

Select

Wi-Fi Settings

→

Security

to access:

Page 24 / 37

24

Unless one of these encryption modes is selected, wireless transmissions to and from your wireless network can

be easily intercepted and interpreted by unauthorized users.

The security modes are described below:

z

OPEN

: You can authenticate successfully with a SSID, whether it is valid or empty.

z

SHARED

: The WLAN clients who have the same WEP key with wireless gateway can pass the

authentication and access the wireless network.

z

WPA-PSK

: WPA Pre-Shared Key, Enter the Pre-Shared key as a plain text (ASCII) pass-phrase of at least

8 characters.

z

WPA2-PSK

: It is the securer version of WPA with implementation of the 802.11i standard.

z

WPA Algorithm

:

TKIP

,

AES

or

AUTO

.

z

Pass phrase

: You can input a pass phrase encryption key (8~64 bytes).

If the Authentication type is

OPEN

, the bottom part of the configuration page will appear:

z

Encrypt Type

: Set the encrypt type.

z

WEP Keys

: At most four keys can be set in the blank. Choose the primary key index. The primary key is

the only key in use at a given time. Whatever keys you enter for an access point, you must also enter the

same keys for the client adapter in the same order. In other words, WEP key 1 on the AP must match WEP

key 1 on the client adapter, WEP key 2 on the AP must match WEP key 2 on the client adapter, etc. A

WEP is either 10 or 26 hexadecimal digits (0~9,a~f and A~F)based on whether you select 64 bits or 128

bits

in the

Encryption Strength drop-down list

If the Authentication type is

SHARED,

the bottom part of the configuration page will appear:

Page 25 / 37

25

Firewall

MAC/IP/Port Filtering

Select

Firewall

→

MAC/IP/Port Filtering

to access:

If you select

Enable

, the filter settings will appear:

Rate

Popular Qualcomm Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share