Page 11 / 36
Scroll up to view Page 6 - 10
11
Section There: Configure the PCs
For Windows XP/2k
1. Go to the Network screen by clicking the
Start
button. Click
Control Panel
. From there, double-click the
Network Connections
icon.
2. Under LAN or Hight-Speed Internet, Right-Click
Local Area
Connection
icon, select Properties.
3. Select
Internet Protocol (TCP/IP)
, click Properties.
4. Select
Obtain an IP address automatically
, click
OK
5. Click the
OK
button again.
Page 12 / 36
12
3.2
Verify the link between your PC and Router
a)
From start > Run
b)
c)
If the connection has been established, You will
receive reply from the router.
d)
If you receive “Request timed out”, that means
the link has not been established, pls. check the
network cable and IP address. (or try to restart
your PC)
Notes:
1. Under MS-DOS mode, you can type
ipconfig
to check your
IP address. (to renew IP: ipconfig /renew )
2. You may have to disable the proxy settings on your Internet
browser .
Tools>Internet Options>Connection>LAN
settings>Disable Proxy Server
3.
Make sure that your browser is set to connect directly .
For Internet Explorer, click
Tools
,
Internet Options
, and then the
Connection
tab.
Make sure that Internet Explorer is set to
Never
dial a connection.
For Netscape Navigator, click
Edit
,
Preferences
,
Advanced
, and
Proxy
.
Make sure that Netscape Navigator is set to
Direct
connection to the Internet.
Section There: Configure the PCs
Page 13 / 36
13
Section Four: Web-Based Management
Section Four
Web-Based Management
4.1. Login
1)
Open Internet Explorer /Netscape , type
2)
The system will ask for administrator’s username and
password when restarting or configuring. It is illustrated
in the following figure.
Default
username:
admin
password:
password
Page 14 / 36
14
4.2 Setup
Hurricane 9000
Section Four: Web-Based Management
Click WAN under configuration, Slect Adapter: PVC0, press Submit
Button.
Page 15 / 36
15
VPI/VCI:
ATM VC of local ADSL Internet Service Provider.
(e.g. Singapore: VPI/VCI=0/100;
Malaysia: VPI/VCI=0/35;
Indonesia: VPI/
VCI=1/33; SriLanKa: VPI/VCI=8/35; Thailand: VPI/VCI=1/32)
Username and Password:
the user name and password will be
provided by your ISP when applying for PPP ADSL service.
You can leave others settings by default.
Press
Submit
button, then Click
Save Configuration
, select Save and
Reboot.
Encapsulation
: PPPoA, PPPoE, 1483 router, IPoA and 1483 Bridge.
Please selct one according to
your local ISP designation.
(e.g.
Singapore/Indonesia
: PPPoA VCMUX;
Malaysia/Thailand
:
PPPoE LLC)
Static WAN IP Configuration (Optional)
If you are using 1483 Routed IP or Classical IP over ATM, please enter the
IP address, Subnet Mask and Gateway
(Provided by your local ISP)
Disconnect Timeout:
The Disconnect Timeout allows users to set the
specific period of time to disconnect from the ISP. The default is 0, which
means never disconnect from the ISP.
Section Four: Web-Based Management
19216811.live