Page 61 / 66 Scroll up to view Page 56 - 60
59
ADSL
Transmit total PDUs:
This field displays the number of total PDU transmitted in the last
second.
Transmit total Error Counts:
This field displays the number of total error transmitted in
the last second.
Receive total PDUs:
This field displays the number of total PDU received in the last
second.
Receive total Error Counts:
This field displays the number of total error received in the
last second.
WLAN
Tx Frames Count:
This field displays the number of frames transmitted in the last
second.
Tx Errors Count:
This field displays the number of errors frames transmitted in the last
second.
Tx Drops Count:
This field displays the number of drops frames transmitted in the last
second.
Rx Frames Count:
This field displays the number of frames received in the last second.
Page 62 / 66
60
Rx Errors Count:
This field displays the number of errors frames received in the last
second.
Rx Drops Count:
This field displays the number of drops frames received in the last
second.
Page 63 / 66
61
4.7 Help
If have any question in establishing ADSL2+ Router, you can read this sections and receive
useful information fast.
Page 64 / 66
62
Chapter 5
Troubleshooting
If the ADSL2+ Router is not functioning properly, you can refer first to this chapter for simple
troubleshooting before contacting your service provider. This could save your time and effort
but if the symptoms persist, then consult your service provider.
Problems starting up the router
Problem
Corrective Action
None of the LEDs
are on when you
turn on the router.
Check the connection between the adapter and the router. If
the error persists, you may have a hardware problem. In this
case you should contact technical support.
You have forgotten
your router login
and/or password
.
Try the default login and password, please refers to Chapter
3. If this fails, you can restore your router to its factory
settings by holding the Reset button on the back of your
router for 6 seconds above.
Page 65 / 66
63
Problems with the WAN Interface
Problem
Corrective Action
Initialization of the
PVC connection
(“linesync”) failed.
Ensure that the telephone cable is connected properly from
the ADSL port to the wall jack. The ADSL LED on the front
panel of the router should be on. Check that your VPI, VCI,
encapsulation type and type of multiplexing settings are the
same as those provided by your ISP. Reboot the router GE. If
you still have problems, you may need to verify these settings
with your ISP.
Frequent loss of
ADSL linesync
(disconnections).
Ensure that all other devices connected to the same
telephone line as your router (e.g. telephones, fax machines,
analogue modems) have a line filter connected between
them and the wall socket (unless you are using a Central
Splitter or Central Filter installed by a qualified and licensed
electrician), and ensure that all line filters are correctly
installed and the right way around. Missing line filters or line
filters installed the wrong way around can cause problems
with your ADSL connection, including causing frequent
disconnections.
Problems with the LAN Interface
Problem
Corrective Action
Can’t ping any PCs
on the LAN.
Check the Ethernet LEDs on the front panel. The LED should
be on for a port that has a PC connected. If it is off, check the
cables between your router and the PC. Make sure you have
uninstalled any software firewall for troubleshooting.
Verify that the IP address and the subnet mask are consistent
between the router and the workstations.

Rate

4.7 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top