Planet ADW-4401 Router Manual PDF (Setup & Configuration Guide)

Page 6 / 63 Scroll up to view Page 1 - 5

6

3.7.1.4 DNS Relay……………………………………………………...36

3.8 Wireless Configuration……………………………………………………

......

36

3.8.1 Wireless Settings……………………………………….……………

....

36

3.8.1.1 Wireless Security………………………….……………….…...37

3.8.1.2 Advanced Setting…………………………….….…………..….38

3.8.1.3 MAC Address………………………………….………

.............

39

3.9 Access Management

.................................................................................

…….39

3.9.1 ACL…….…………………………………………………………

..........

39

3.9.2 IP Filtering……………………………………………………………….40

3.9.3 SNMP……………………………………………………………….…...42

3.9.4 UPNP

..................................................................................................

…...43

3.9.5 DDNS……………………………………………………………….…...44

3.10 Advanced Setup

.........

…

...................................................................................

45

3.10.1 NAT Setting…………………………………………………………...45

3.10.1.1 Virtual Server……………………………………………

....

…49

3.10.1.2 DMZ……………………………………………………

.........

50

3.10.1.3 IP Address Mapping

........................................................

…

.....

51

3.10.2 ADSL Type Setting……………………………………………

...........

52

3.10.3 Routing

....................................................................................

…

..........

53

3.10.3.1 Static Routing

..................................................................

…...53

3.10.3.2 Dynamic Routing

.............................................................

…...54

3.10.4 Firewall

...........................................................................................

…...55

Appendix A: Glossary

...........................................................................................

…...56

Page 7 / 63

7

°

1. Introduction

The PLANET 802.11g Wireless ADSL 2/2+ Router, ADW-4401v2, provides office

and residential users the ideal solution for sharing a high-speed ADSL 2/2+ broadband

Internet connection on a 54Mbps wireless network and a 10/100Mbps Fast Ethernet

backbone. It can support downstream transmission rates of up to 24Mbps and upstream

transmission rates of up to 3.5Mbps. The product supports PPPoA (RFC 2364 - PPP

over ATM Adaptation Layer 5), RFC 2684 encapsulation over ATM (bridged or

routed), PPP over Ethernet (RFC 2516), and IPoA (RFC1483) to establish a connection

with ISP.

Via the user-friendly management interface, ADW-4401v2 can be managed by

workstations running standard web browsers. Furthermore, ADW-4401v2 provides

DHCP server, NAT, virtual server, DMZ, access control, IP filter, PPTP/IPSec/L2TP

pass-through, DNS Proxy, DDNS, and UPnP capability.

The ADW-4401v2 also serves as an Internet firewall, protecting your network from

being accessed by outside users. It provides the natural firewall function (Network

Address Translation, NAT). All incoming and outgoing IPs are monitored and filtered.

Moreover, it can be configured to block internal users from accessing to the Internet.

°

1.1 Feature

Internet Access Features

±

Shared Internet Access.

All users on the LAN or WLAN can access the

Internet through the ADW-4401v2 using only a single external IP Address.

The local (invalid) IP Addresses are hidden from external sources. This

process is called NAT (Network Address Translation).

±

Built-in ADSL 2/2+ Modem.

The ADW-4401v2 provides ADSL 2/2+

modem, and supports all common ADSL connections.

±

IPoA, PPPoE, PPPoA, Direct Connection Support.

Various WAN

connections are supported by ADW-4401v2.

±

Auto-detection of Internet Connection Method.

In most situations, the

ADW-4401v2 can test your ADSL and Internet connection to determine the

connection method used by your ISP.

±

Fixed or Dynamic IP Address.

On the Internet (WAN port) connection, the

ADW-4401v2 supports both Dynamic IP Address (IP Address is allocated on

connection) and Fixed IP Address.

Advanced Internet Functions

±

Virtual Servers.

This feature allows Internet users to access Internet servers

on your LAN. The required setup is quick and easy.

±

Firewall.

Supports simple firewall with NAT technology and provides option

for blocking access from Internet, like Web, FTP, Telnet, SNMP, and ICMP.

±

Universal Plug and Play (UPnP)

UPnP allows automatic discovery and

configuration of the Broadband Router. UPnP is supported by Windows ME,

XP, or later.

±

Dynamic DNS Support.

DDNS, when used with the Virtual Servers feature,

allows users to connect to Servers on your LAN using a Domain Name, even

if you have a dynamic IP address which changes every time you connect.

Page 8 / 63

8

±

VPN Pass through Support.

PCs with VPN (Virtual Private Networking)

software using PPTP, L2TP and IPSec are transparently supported - no

configuration is required.

±

RIP1/2 Routing.

It supports RIP1/2 routing protocol for routing capability.

±

Simple Network Management Protocol (SNMP).

It is an easy way to remotely

manage the router via SNMP.

Wireless Features

±

Standards Compliant.

The ADW-4401v2 complies with the IEEE802.11g

(DSSS) specifications for Wireless LANs. Maximum of 54Mbps are

supported.

±

Supports both 802.11b and 802.11g Wireless Stations.

The 802.11g

standard provides for backward compatibility with the 802.11b standard, so

both 802.11b and 802.11g Wireless stations can be used simultaneously.

±

WEP support.

Support for WEP (Wired Equivalent Privacy) is included.

Key sizes of 64 Bit and 128 Bit are supported.

±

WPA-PSK support.

WPA-PSK_TKIP and WAP-PSK_AES encryption are

supported.

±

Wireless MAC Access Control.

The Wireless Access Control feature can

check the MAC address (hardware address) of Wireless stations to ensure that

only trusted Wireless Stations can access your LAN.

LAN Features

±

4-Port Switch.

The ADW-4401v2 incorporates a 4-port 10/100BaseT

switching hub, making it easy to create or extend your LAN.

±

DHCP Server Support.

D

ynamic

H

ost

C

onfiguration

P

rotocol provides a

dynamic IP address to PCs and other devices upon request. The

ADW-4401v2 can act as a DHCP Server for devices on your local LAN and

WLAN.

°

1.2 Package Contents

±²

ADW-4401v2 Unit

±²

Power Adapter

±²

Quick Installation Guide

±²

User’s Manual CD

±²

RJ-11 (ADSL) cable

±²

RJ-45 cable

°

1.3 Physical Details

Front Panel

Page 9 / 63

9

Front Panel LED definition

LED

State

Description

ON

When the router is powered on and in ready state

PWR

OFF

When the router is powered off.

WLAN

Flashing

When wireless AP is ready

ON

Successful connection between ADSL modem and telecom'

s

network

ADSL

Flashing

Modem is trying to establish a connection to telecom’s network

ON

Link

Flashing

TX or RX activity

LAN

1-4

OFF

No Link

These four LAN (Local Area Network) ports are where you will

connect networked devices, such as PCs, print servers remote hard

drives, and anything else you want to put on your network

Rear Panel

Rear panel Port and Button Definition

Connector

Description

POWER

Power connector with 12V AC 1.0 A

POWER

Button

The power button is for turn on or turns off the router.

ADSL

Connector

The RJ-11 connector allows data communication between t

he modem and

the ADSL network through a twisted-pair phone wire

LAN (1-4)

Router is successfully connected to a device through the corresponding

port (1, 2, 3, or 4). If the LED is flashing, the Router is actively sending or

receiving data over that port.

Reset

Button

The reset button, the router restore the default settings when press this

button until reboot

Page 10 / 63

10

°

2. Installation

This chapter offers information about installing your router. If you are not familiar with

the hardware or software parameters presented here, please consult your service

provider for the values needed.

°

2.1 System Requirement

1.

Personal computer (PC)

2.

Pentium III 266 MHz processor or higher

3.

128 MB RAM minimum

4.

20 MB of free disk space minimum

5.

RJ45 Ethernet Port

°

2.2 Hardware Installation

This section describes how to connect and configure the ADW-4401.

Step 1. Connect the ADSL Line

Connect the router directly to the wall jack using the included ADSL cable.

Step 2. Connect a Workstation to the Router's LAN port

There are two methods to connect the router and workstation. The one use the crossover

Ethernet cable to connect directly between them. The other use straight Ethernet cable

to connect router with hub (or switch), then go to the workstation.

Step 3. Connect the Power Adapter to the Router

Connect the power adapter to the port labeled POWER on the rear panel of router.

Step 4. Connect All Cables to the Network

The procedure for connecting cables differs depending on whether or not your

Power Adapter

To PC /Hub

To ADSL Line

Rate

Popular Planet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share