Page 26 / 66
Scroll up to view Page 21 - 25
Service Name:
Type the name of your PPPoE service here.
User Name:
Enter the user name exactly as your ISP assigned.
Password:
Enter the password associated with the user name above.
IP Address:
Type your ISP assigned IP address in the IP Address text box
below.
Connection:
Select
Connect on Demand
when you don't want the connection
up all the time and specify an idle time-out (in seconds) in the
Max. Idle Timeout
field.
Network Address Translation:
Select
None
,
Many to One
,
or
Many to Many
26
Page 27 / 66
from the drop-sown list box. Refer to the NAT chapter (4.2.4) for more details.
4.1.3 1483 Routed IP
Select 1483 Router IP from the Encapsulation drop-down list box in the first
wizard screen to display the screen as shown.
IP Address:
Type your ISP assigned IP address in the IP Address text box
below.
Network Address Translation:
Select
None
,
Many to One
or
Many to Many
from the drop-sown list box. Refer to the NAT chapter (4.2.4) for more details.
4.1.4 1483 Bridged IP
Select 1483 Bridged IP from the Encapsulation in the wizard screen to display
the screen as shown.
27
Page 28 / 66
IP Address:
Type your ISP assigned IP address in the IP Address text box
below.
Subnet Mask:
Enter a subnet mask in dotted decimal notation.
Gateway:
You must specify a gateway IP address (supplied by your ISP) when
you use
1483 Bridged IP
in the
Encapsulation
field in the previous screen.
Network Address Translation:
Select
None
,
Many to One
or
Many to Many
from the drop-sown list box. Refer to the NAT chapter (4.2.4) for more details.
4.1.5 PPPoA
PPPoA stands for Point to Point Protocol over ATM Adaptation Layer 5 (AAL5). It
provides access control and billing functionality in a manner similar to dial-up
services using PPP. Select PPPoA from the Encapsulation in the first wizard
screen to display the screen as shown.
28
Page 29 / 66
User Name:
Enter the user name exactly as your ISP assigned.
Password:
Enter the password associated with the user name above.
IP Address:
Type your ISP assigned IP address in the IP Address text box
below.
Connection:
Select
Connect on Demand
when you don't want the connection
up all the time and specify an idle time-out (in seconds) in the
Max. Idle Timeout
field.
Network Address Translation:
Select
None
,
Many to One
or
Many to Many
from the drop-sown list box. Refer to the NAT chapter (4.2.4) for more details.
29
Page 30 / 66
4.1.6 Wizard Setup Configuration
If you want to change your ADE-3400/4400 LAN settings, click Change LAN
Configuration to display the screen as shown next.
30
19216811.live