1. Home
    2. /
  2. Manuals
    3. /
  3. Pirelli
    4. /
  4. Wireless-VoIP-AG-v1
    5. /
  5. 21
Page 101 / 149 Scroll up to view Page 96 - 100
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
95
OGU 930500105-A1
Advanced Section
- Start. Date and time when daylight saving starts.
- End. Date and time when daylight saving ends.
- Offset. Daylight saving time offset.
3.
If you want the gateway to perform an automatic time update, perform the fol-
lowing:
•
Select the 'Enabled' check-box under the 'Automatic Time Update' section.
•
Select the protocol to be used to perform the time update by selecting wither the 'Time of Day' or
'Network Time Protocol' radio button.
•
Specify how often to perform the update in the 'Update Every' field.
•
You can define time server addresses by pressing the 'New Entry' link on the bottom of the
'Automatic Time Update' section.
FIGURE 8.
Date and Time Panel
DIAGNOSTICS
The Diagnostics screen can assist you in testing network connectivity and view-
ing statistics, such as the number of packets transmitted and received, round-
trip time and success status.
Page 102 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
96
OGU 930500105-A1
Advanced Section
FIGURE 9.
Diagnostics Panel
Network connectivity.
To diagnose network connectivity, follow these steps:
1.
Click the 'Diagnostics' icon from the 'Advanced' screen in the Web-based
Management. The 'Diagnostics' screen will appear.
2.
Under the Ping section, enter the IP address or URL to be tested in the 'Des-
tination' field.
3.
Enter the number of pings you would like to perform.
4.
Press the 'Go' button.
5.
In a few seconds, diagnostic statistics will be displayed. If no new information
is displayed, press the 'Refresh' button.
Performing a Traceroute.
To perform a traceroute, follow these steps:
1.
Click the 'Diagnostics' icon from the 'Advanced' screen in the Web-based
Management. The 'Diagnostics' screen will appear.
2.
Under the Traceroute section, enter the IP address or URL to be tested in the
'Destination' field.
3.
Press the 'Go' button. A traceroute will commence, constantly refreshing the
screen.
4.
To stop the trace and view the results, press 'Cancel'.
Performing a PVC Scan.
To perform a PVC scan, follow these steps:
1.
Click the 'Diagnostics' icon from the 'Advanced' screen in the Web-based
Management. The 'Diagnostics' screen will appear.
Page 103 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
97
OGU 930500105-A1
Advanced Section
2.
Under the PVC Scan section, press the 'Go' button.
3.
In a few seconds, diagnostic statistics will be displayed. If no new information
is displayed, press the 'Refresh' button.
Performing an OAM Ping.
To perform an OAM ping, follow these steps:
1.
Click the 'Diagnostics' icon from the 'Advanced' screen in the Web-based
Management. The 'Diagnostics' screen will appear.
2.
Under the OAM Ping section, select the type of OAM ping to perform: F4
End-to-End, F4 Segment, F5 End-to-End, F5 Segment
3.
Press the 'Go' button.
4.
In a few seconds, diagnostic statistics will be displayed. If no new information
is displayed, press the 'Refresh' button.
DISCUS FIRMWARE
UPGRADE
DISCUS™ Multiplay Wireless VoIP AG offers a built-in mechanism for upgrad-
ing its software image, without losing any of your custom configurations and set-
tings. To upgrade Discus' software image using a locally available .rmt file:
1. Click the 'Discus Firmware Upgrade' icon from the 'Advanced' screen. The
'Discus Firmware Upgrade' screen will appear.
2. In the 'Upgrade From a Computer in the Network' section, press the 'Upgrade
Now' button. The 'Upgrade From a Computer in the Network' screen will appear.
3. Enter the path of the software image file, or press the 'Browse' button to
browse for the file on your PC, and click 'OK'. The file will start loading from your
PC to your gateway.
4. Click 'OK' to confirm your upgrade action. The upgrade process will begin and
should take no longer than one minute to complete.
At the conclusion of the upgrade process the Discus will automatically reboot.
The new software version will run, maintaining your custom configurations and
settings.
Page 104 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
98
OGU 930500105-A1
Advanced Section
FIGURE 10.
Discus Firmware Upgrade Panel
DISK MANAGEMENT
DISCUS™ Multiplay Wireless VoIP AG can operate as a disk manager for exter-
nal storage devices connected via USB or FireWire. Your home-network's LAN
devices can share this storage device as a mapped network drive, and
exchange information without directly accessing each other. The Web based
management provides disk management utilities such as partitioning and for-
matting.
An internal disk or a connected storage device will appear on the network map.
You can view information about the disk by clicking its icon. The 'Disk Informa-
tion' screen will appear. For a broader view, click the 'Shared Storage' link from
the 'Local Network' tab of the Web-based management. The 'Disk Management'
screen will appear.
FIGURE 11.
Disk Management Panel
Enabled.
Check or un-check this box to enable or disable this feature.
Page 105 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
99
OGU 930500105-A1
Advanced Section
System Data.
The the name of the partition intended to hold the system data.
User Data.
The the name of the partition intended to hold the user data.
Disks.
This section displays a table with your connected storage devices. The
'Device' column displays the names the Router grants connected devices. Click
this link to view the device's 'Disk Information' screen. If a device is partitioned,
the 'Partitions' column will display its partition names. If the partitions are for-
matted, their name will include a letter.
RAID Devices.
This section displays the RAID devices when configured.
FILE SERVER
The Router provides a file server utility, allowing you to perform various tasks on
your files, such as manage file server shares and define access control lists.
The file server utility complements Discus' disk management.
Access the File Server settings either from its link in the 'Storage' tab under the
'Services' screen, or by clicking the 'File Server' icon in the 'Advanced' screen.
The 'File Server' screen will appear.
Enabled.
Check or un-check this box to enable or disable this feature. NetBIOS
Workgroup Discus’ workgroup name that will be displayed in the Windows net-
work map of LAN hosts.
File Server Shares.
Define file shares on your disk partitions.
FIGURE 12.
File Server Panel
IP ADDRESS DISTRIBUTION
Your gateway's Dynamic Host Configuration Protocol (DHCP) server makes it
possible to easily add computers that are configured as DHCP clients to the
home network. It provides a mechanism for allocating IP addresses and deliver-
ing network configuration parameters to such hosts. Router's default DHCP
server is the LAN bridge.

Rate

3.5 / 5 based on 2 votes.

Popular Pirelli Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top