1. Home
    2. /
  2. Manuals
    3. /
  3. Pirelli
    4. /
  4. VoIP-AG-v1-t-Annex-A-OT
    5. /
  5. 17
Page 81 / 149 Scroll up to view Page 76 - 80
Voice over IP Section
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
75
OGU 930500105-A1
Voice over IP
Section
This chapter will describe the
Voice Section
accessible from the
Home Page
of the
DISCUS™ Multiplay Wireless VoIP AG
.
LINE SETTINGS
The Line Settings tab of the VoIP screen defines the phone ports of
the Router and allows you to configure them.
1.
Click the 'Voice Over IP' side-bar icon.
2.
Click the 'Line Settings' tab, the following screen will appear.
Before starting to make phone calls, you need to configure each
line's parameters. You can manage which telephone is operational
by marking the check-box next to it.
Be aware that any configuration changes could compromise your connectivity.
Page 82 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
76
OGU 930500105-A1
Voice over IP Section
FIGURE 1.
Line Settings Panel
3.
Click the edit action icon of each line to configure its different parameters.
SPEED DIAL
You can assign speed dial numbers to parties you frequently call. A speed dial
entry must specify a destination which may be of one of three types: proxy,
local line or direct call.
FIGURE 2.
Speed Dial Panel
Speed Dial via Proxy.
To add a new proxy speed dial entry:
1.
Click the 'Speed Dial' tab.
2.
Click the 'New Entry' link to add a new speed dial entry. The 'Speed Dial
Settings' screen will appear
3.
Enter the following parameters:
- Speed Dial: A shortcut number which you will dial to call this party.
- Destination: The entry's destination, in this case a proxy server.
- User ID: Specify the remote party's user ID.
4.
Click 'OK' to save the settings.
Page 83 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
77
OGU 930500105-A1
Voice over IP Section
Speed Dial via Local Line.
To add a new local line speed dial entry:
1.
Click the 'New Entry' link on the 'Speed Dial' tab and select the 'Local Line' option
from the combo-box.
2.
Enter the following parameters:
- Speed Dial: A shortcut number which you will dial to call this party.
- Destination: The entry's destination, in this case a local line.
- Line: A combo-box will display your pre-defined local lines. Select the desti-
nation line.
3.
Click 'OK' to save the settings.
Speed Dial via Direct Call.
To add a new direct call speed dial entry:
1.
Click the 'New Entry' link on the 'Speed Dial' tab and select the 'Direct Call' option
from the combo-box.
2.
Enter the following parameters:
- Speed Dial: A shortcut number which you will dial to call this party.
- Destination: The entry's destination, in this case a direct call.
- User ID: Specify the remote party's user ID.
- IP Address or Host Name: Specify the remote party's IP Address or host
name.
3.
Click 'OK' to save the settings.
MONITORING
It is possible to access to the line monitoring page by selecting the ‘Monitoring’
Tab panel: the Registration Status and Call State for each line are shown.
FIGURE 3.
Monitoring Panel
ADVANCED
The IP Telephony tab of the Voice over IP screen allows configuration of dialing
parameters, VoIP Signaling Protocol, media streaming parameters and codecs.
The following sections describe these various parameters.
Page 84 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
78
OGU 930500105-A1
Voice over IP Section
FIGURE 4.
Advanced Panel
Dialing Parameters.
Dialing Timeouts:
Dialing timeout specifies the duration (in seconds) of
allowed inactivity between dialed digits. If the limit is exceeded, the dialing pro-
cess will time out and you will hear a warning tone. When you work with a proxy
or gatekeeper, the number you have dialed before the dialing process has timed
out is sent to the proxy/gatekeeper as the user ID to be called. This is useful for
calling a remote party without creating a speed dial entry (assuming the remote
party is registered with the proxy/gatekeeper).
Phone Number Size:
The maximum length of shortcut numbers that you can
enter and the maximum number of digits that you can dial.
Signaling Protocol.
The signaling protocol options available in the combo-box,
are determined by the VoIP stack on your gateway.
Page 85 / 149
DISCUS™ Multiplay Wireless VoIP AG
(C) (2006) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
79
OGU 930500105-A1
Voice over IP Section
A different subset of parameters will become visible with each of the combo-box
choices. To apply the change of protocol you must press either 'OK' or 'Apply'. If
the applied protocol is of another stack, the Router will reboot after you accept
the reboot warning.
RTP.
Local RTP Port Range defines the port range for Real Time Protocol
(RTP) voice transport.
Quality of Service.
Type of Service (HEX) This is a part of the IP header that
defines the type of routing service to be used to tag outgoing voice packets orig-
inated from the Router. It is used to tell routers along the way that this packet
should get specific QoS. Leave this value as 0XB8 (default) if you are unfamiliar
with the differentiated Services IP protocol parameter.
Codecs.
Codecs define the method of relaying voice data. Different codecs have
different characteristics, such as data compression and voice quality. For exam-
ple, G.723 is a codec that uses compression, so it is good for use where band-
width is limited but its voice quality is not as good compared to other codecs
such as the G.711.

Rate

4.5 / 5 based on 2 votes.

Popular Pirelli Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top