1. Home
    2. /
  2. Manuals
    3. /
  3. Pirelli
    4. /
  4. P-RG-EA4201N
    5. /
  5. 6
Page 26 / 182 Scroll up to view Page 21 - 25
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Setting Up Your Computer
OGU 930500275-A1
19
Setting Up Your Computer
Setting Up Your
Computer
The Router has the ability to dynamically allocate network addresses to the
computers on your network, using DHCP. However, your computers need to be
configured correctly for this to take place. To change the configuration of your
computers to allow this, follow the instructions in this chapter.
INSTALL SOFTWARE
The very first time you set up your computer, we recommend you to use the
Smart Setup Configuration Utility if your ISP has provided you with.
Before installing the
PRG AV4202N
software please close all applications to avoid any conflict.
This utility offers a guided product tour, a step by step hardware installation
guide, a software installation guide and setup depending on your connection
choice (USB or ETHERNET) and a driven user registration with DSL Internet
connection line check.
Smart Setup Configuration Utility allows, for supported Microsoft® Windows
Operating Systems, to setup automatically your computer Ethernet settings.
To launch it, insert the CD-ROM in CD-ROM unit: if the auto-play function is en-
abled it will start automatically, otherwise open it manually from “
x:
”, where
x
is
your CD-ROM drive letter.
Page 27 / 182
PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
20
OGU 930500275-A1
Setting Up Your Computer
ETHERNET CONNECTION
In case you already established a connection with your Router a first time
and/or you do need to set up manually a connection to your Router, please fol-
low the instructions described in this chapter. You will be guided to set up an
Ethernet connection to the Router. To do so, first you have to verify the exis-
tence of a TCP/IP protocol stack and, then, according to your Operating Sys-
tem, to establish an Ethernet connection to it. This connection will require you to
enable your computer to receive from the Router its own IP Address automati-
cally: in such a case, the Router acts like the DHCP server in your local net-
work.
ETHERNET CONNECTION
>> TCP/IP PROTOCOL
INSTALLATION
This procedure requires the TCP/IP protocol installed on your computer. Refer
to the following chapters and to your Microsoft® Windows or Apple® MacOS
10.x operating systems manuals.
Microsoft® Windows 98SE, ME, 2000
1.
Put in the CD-ROM drive your Windows installation CD-ROM
2.
Starting from
Start -> Settings -> Control Panel -> Network Control Panel
,
make a double click on the
Network
icon
3.
Select
Configuration -> TCP/IP
and then click on the
Add
button
4.
Select Protocols, click on
Add
button and choose Microsoft TCP/IP. Then
click on the
OK
button
5.
After the computer reboots, you're ready to configure the TCP/IP settings
Configure the Network adapter to obtain automatically an IP address
Microsoft® Windows XP
1.
Put in the CD-ROM drive your Windows installation CD-ROM
2.
Starting from
Start -> Settings -> Control Panel
make a double click on the
Network
icon.
3.
Select
Protocol
and click on the
Add
button. Select
Microsoft
and
TCP/IP
,
then click on the
OK
button.
4.
Configure the Network adapter to obtain automatically an IP address.
Apple® MacOS 10.x
TCP/IP is installed on a MacOS system as part of Open Transport.
ETHERNET CONNECTION
>> MS WINDOWS 98SE, ME,
2000
To configure TCP/IP on these Operating Systems follow these steps:
1.
Select
Start -> Settings -> Control Panel
and make a double click on the
Network
icon.
Page 28 / 182
PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Setting Up Your Computer
OGU 930500275-A1
21
2.
Select
Configuration ->TCP/IP
then click on
Properties
button.
FIGURE 1.
Local Area Connection Properties
3.
Select the
IP Address
Tab, then check to obtain an automatically IP address.
Click on
OK
button.
FIGURE 2.
Internet Protocol (TCP/IP) Properties
Page 29 / 182
PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
22
OGU 930500275-A1
Setting Up Your Computer
4.
A system reboot will be required to make the changes real.
5.
Enter
in the address bar of your browser to open the PRG
AV4202N Home Page.
ETHERNET CONNECTION
>> MS WINDOWS XP
To configure TCP/IP on MS Windows XP Operating System follow these steps:
1.
Select
Start -> Settings -> Control Panel
and make a double click on the
Network
icon.
2.
Select
Protocols ->TCP/IP
then click on
Properties
button.
FIGURE 3.
Local Area Connection Properties
3.
Select the General Tab, then check to obtain an automatically IP address.
Click on
OK
button.
Page 30 / 182
PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Setting Up Your Computer
OGU 930500275-A1
23
FIGURE 4.
Internet Protocol (TCP/IP) Properties
ETHERNET CONNECTION
>> MAC OS 10.X
To configure TCP/IP on MAC OS 10.x follow these steps:
1.
Open the Apple Menu -> System Preferences and select Network.
2.
From the Show drop down list, according to the type of connection used, se-
lect Built-in Ethernet.
3.
Select the
TCP/IP
tab.
4.
Select
DHCP
from the Configure pop-up menu to have a dynamic IP ad-
dress.

Rate

4 / 5 based on 1 vote.

Popular Pirelli Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top