PRG AV4202N

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

74

OGU 930500275-A1

Security Section

FIGURE 10.

Security Log panel

Time.

The time the event occurred.

Event.

There are five kinds of events:



Inbound Traffic: The event is a result of an incoming packet.



Outbound Traffic: The event is a result of outgoing packet.



Firewall Setup: Configuration message.



WBM Login: Indicates that a user has logged in to WBM.



CLI Login: Indicates that a user has logged in to CLI (via Telnet).

Event-Type.

A textual description of the event:



Blocked: The packet was blocked. The message is colored red.



Accepted: The packet was accepted. The message is colored green.

Details.

More details about the packet or the event, such as protocol, IP ad-

dresses, ports, etc.

To view or change the security log settings, click the 'Settings' button that ap-

pears at the top of the 'Firewall Log' screen. The 'Security Log Settings' screen

will appear allowing you to set the types of activities for which you would like to

have a log message generated.

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

Voice over IP Section

OGU 930500275-A1

75

Voice over IP

Section

This chapter will describe the

Voice over IP Section

accessible from the

Home

Page

of the

PRG AV4202N

.

Be aware that any configuration changes could compromise your connectivity.

LINE SETTINGS

The Line Settings tab of the VoIP screen defines the phone ports of the Router

and allows you to configure them.

1.

Click the 'Voice Over IP' side-bar icon.

2.

Click the 'Line Settings' tab, the following screen will appear. Before starting

to make phone calls, you need to configure each line's parameters. You can

manage which telephone is operational by marking the check-box next to it.

PRG AV4202N

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

76

OGU 930500275-A1

Voice over IP Section

FIGURE 1.

Line Settings Panel

3.

Click the edit action icon of each line to configure its different parameters.

SPEED DIAL

You can assign speed dial numbers to parties you frequently call. A speed dial

entry must specify a destination which may be of one of three types: proxy, local

line or direct call.

FIGURE 2.

Speed Dial Panel

Speed Dial via Proxy.

To add a new proxy speed dial entry:

1.

Click the 'Speed Dial' tab.

2.

Click the 'New Entry' link to add a new speed dial entry. The 'Speed Dial Set-

tings' screen will appear

3.

Enter the following parameters:

- Speed Dial: A shortcut number which you will dial to call this party.

- Destination: The entry's destination, in this case a proxy server.

- User ID: Specify the remote party's user ID.

4.

Click 'OK' to save the settings.

PRG AV4202N

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

Voice over IP Section

OGU 930500275-A1

77

Speed Dial via Local Line.

To add a new local line speed dial entry:

1.

Click the 'New Entry' link on the 'Speed Dial' tab and select the 'Local Line'

option from the combo-box.

2.

Enter the following parameters:

- Speed Dial: A shortcut number which you will dial to call this party.

- Destination: The entry's destination, in this case a local line.

- Line: A combo-box will display your pre-defined local lines. Select the des-

tination line.

3.

Click 'OK' to save the settings.

Speed Dial via Direct Call.

To add a new direct call speed dial entry:

1.

Click the 'New Entry' link on the 'Speed Dial' tab and select the 'Direct Call'

option from the combo-box.

2.

Enter the following parameters:

- Speed Dial: A shortcut number which you will dial to call this party.

- Destination: The entry's destination, in this case a direct call.

- User ID: Specify the remote party's user ID.

- IP Address or Host Name: Specify the remote party's IP Address or host

name.

3.

Click 'OK' to save the settings.

MONITORING

It is possible to access to the line monitoring page by selecting the ‘Monitoring’

Tab panel: the Registration Status and Call State for each line are shown.

FIGURE 3.

Monitoring Panel

PRG AV4202N

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

78

OGU 930500275-A1

Voice over IP Section

ADVANCED

The IP Telephony tab of the Voice over IP screen allows configuration of dialing

parameters, VoIP Signaling Protocol, media streaming parameters and codecs.

The following sections describe these various parameters.