50

4.3.1.2 CONFIG - WAN Setup - Modem

Modem:

This field allows you to select from the following ADSL handshake protocols. Check your ISP for the

connection type.

±

MMODE:

Multiple Mode ( Default ).

±

T1413:

T1.413 Mode.

±

GDMT:

G.dmt Mode.

±

GLITE:

G.Lite Mode.

±

Apply:

Click

Apply

to complete the setting.

±

Cancel:

Click

Cancel

to ignore all the changes.

±

To complete and save the connection profile, click

Save All

after clicking the

Apply

button.

51

4.3.2 CONFIG - LAN Setup

The

LAN Configuration

page

allow you to select or assign physical interfaces to LAN group and configure

LAN IP Address and DHCP functionality.

52

4.3.2.1 LAN Setup - LAN Configuration

Click LAN Configuration and the following screen will be shown.

±

Click

Add

or

Remove

Interfaces from list under the different LAN Group. The LAN Group features

only supported under

Bridge

Mode

setting. Interfaces under the same LAN Group (WLAN,

Ethernet and USB) will have the ability to communicate with each other. Different LAN Group are

prohibited to communicate with one another.

±

Click

Configure

for detail LAN Group setting. Refer to next section for detail LAN Configuration or

Setting.

±

Apply:

Click

Apply

to complete the setting.

±

Cancel:

Click

Cancel

to ignore all the changes.

±

To complete and save the setting, click

Save All

after clicking the

Apply

button.

53

4.3.2.1.1 LAN Configuration - Unmanaged

Unmanaged:

Click the

Unmanaged

radio button, the following configuration screen will pop-up. All filling

items are hidden except the

Server and Relay Off

(Unchangeable) radio button will turn on.

Click the

Services

items will guides you to detail setting. Refer to

ADVANCED

section for

setting/configuration details.

±

Apply:

Click

Apply

to complete the setting.

±

Cancel:

Click

Cancel

to ignore all the changes.

±

To complete and save the setting, click

Save All

after clicking the

Apply

button.

54

4.3.2.1.2 LAN Configuration – Obtain an IP Address Automatically

Obtain an IP address automatically:

The following configuration screen will pop-up. All filling items will be

hidden except

Host Name

,

Domain Name

and

Server and Relay Off

(Unchangeable) radio button will turn

on.

Click

Services

selection items will guides you to detail setting. Refer to

ADVANCED

section for

setting/configuration details.

±

Host Name:

Can be any alpha-numeric expression that does not contain spaces.

±

Domain Name:

Used in conjunction with the host name to uniquely identify the gateway. To

access the WL-8064ARM Wireless ADSL2/2+ Router's web pages, the user can type

192.168.1.1

(The default IP Address) or type

mygateway1.ar7

in the Web browser’s address bar.

±

Apply:

Click

Apply

to complete the setting.

±

Cancel:

Click

Cancel

to ignore all the changes.

±

To complete and save the setting, click

Save All

after clicking the

Apply

button.