Page 56 / 80 Scroll up to view Page 51 - 55
55
3G Modem
ESN
— The Electronic Serial Number (ESN) is used by the mobile data network to identify this
particular modem.
MDN
— The Mobile Directory Number (MDN) is used by the mobile data network to identify
this particular data service.
Version
AP
— For the Access Point component, the version of the firmware currently installed.
Router
— For the Router component, the version of the firmware currently installed.
Modem
— For the Modem component, the version of the firmware currently installed.
System Status
Modem Status
— Click the button to view more information about the Modem status. This
information is mostly used for troubleshooting.
System Log
— Click the button to view the System Log. The System Log records various
operations, and is mostly used for troubleshooting.
Global Traffic Counters
These counters record incoming and outgoing Internet traffic. They continue incrementing until you
click
Restart Counters
.
Start Date
— The date on which these Global Traffic Counters started, usually the date of the
first connection. If the counters have been restarted, this is the date of the last restart.
Total connection time
— This records the total time period during which a data connection
to the Internet has been available.
Data Received
— The total amount of data received.
Data Transmitted
— The total amount of data transmitted.
Restart Counters
— Click the button to set the counters above to zero.
Connection Log
— Click the button to view the Internet Connection Log.
NOTE 
The Internet Connection Log shows only the most recent connections rather than all of the
connections, which contribute to the Traffic Counters.
Page 57 / 80
56
IMPORTANT
Please note: “Data Received” and “Data Transmitted” as seen on this Diagnostics
page are not representative of actual billable data usage when data is transmitted or received
on the Verizon Wireless Network. Due to different network protocol overheads and protocol
conversions, the data transmitted on the Verizon Wireless Network differs from what is observed
on the device. Please see the
Usage
tab in
VZ
Access Manager during USB mode to view the
estimated data usage for your current billing cycle.
Additionally, when using MiFi in WiFi mode, you do not get usage alerts when connecting or be
able to track your usage with the
Usage
button in
VZ
Access Manager. Please periodically connect
in USB mode using
VZ
Access Manager to track your unbilled usage for the current billing cycle.
Buttons
Modem Status
— [See
System Status
(page 55).
]
System Log
— [See
System Status
(page 55).
]
Restart Counters
— [See
Global Traffic Counters
(page 55).
]
Connection Log
— [See
Global Traffic Counters
(page 55).
]
Restart
— Restart MiFi 2200. All Internet connections, and all WiFi connections, are lost
during the restart.
Reset to Factory Defaults
— This button resets all Access Point and Router settings to their
factory default values. All existing settings are lost.
WARNING!
The “Reset to Factory Defaults” operation overwrites ALL existing settings. If
the WiFi settings change, you will lose this connection, and need to reconnect using the new
settings. [See
How do I reset the Access Point and Router settings back to factory settings?
(page
63).
]
Page 58 / 80
57
Port Forwarding
The Advanced Menu includes the Port Forwarding screen.
The Port Forwarding feature allows incoming traffic (from the Internet) to be forwarded to a
particular computer or device on MiFi 2200’s wireless network. Normally, incoming traffic from the
Internet is blocked.
You need to use Port Forwarding to allow Internet users to access any server you are running on
your computer, such as a Web server, FTP server, or E-mail server. Also, for some online games, Port
Forwarding must be used for the game to function correctly.
IMPORTANT
Port forwarding creates a security risk. This feature should be disabled when it is
not required.
Page 59 / 80
58
Using Port Forwarding
A number of common server applications are listed. To use any of these applications, follow this
procedure:
±
Install the application on a computer that is connected to MiFi 2200’s wireless network
(WLAN).
Ensure the computer is connected to MiFi 2200, and record the computer’s IP address for the
MiFi Settings Web UI.
On the Port Forwarding screen, type the computer’s IP Address in the
IP Address on WLAN
field
beside the application name.
Enable the corresponding application on this screen by selecting its checkbox.
Save your changes by clicking
Apply
.
Click
Home
to go to the Home screen, and make a note of MiFi 2200’s IP address.
Tell the person or company that needs port forwarding to connect to MiFi 2200’s IP address
of MiFi 2200 (by default, this is
). Connection requests are forwarded to the IP
address specified in step 3.
When no longer needed, the application should be disabled on this screen by de-selecting its
checkbox, and saving this change by clicking
Apply
. Leaving applications enabled unnecessarily
creates a security risk.
Page 60 / 80
59
Power Management
The Advanced Menu includes the Power Management screen.
MiFi 2200 can switch to a low-power Standby mode. When using battery power, switching to
Standby mode greatly extends the battery life.
To exit Standby mode, press the power button.
Battery Power
Select the desired Standby timer.
When powered by the battery, MiFi 2200 switches to Standby mode after being idle for the selected
time period, provided that no WiFi devices are connected to MiFi.
To prevent switching to Standby mode, select
Never
.
NOTE 
Standby timer settings have no effect when MiFi 2200 is connected to a computer with a USB cable.
The timer options are from 2-60 minutes idle time, or never.
Buttons
Click
Apply
to save changes.
Click
Revert
to return to previous settings.

Rate

4.5 / 5 based on 2 votes.

Popular Novatel Wireless Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top