Page 251 / 342 Scroll up to view Page 246 - 250
Viewing Reports on the Nokia IP45 Security Platform
Nokia IP45 Security Platform User’s Guide v4.0
251
±
Green
—traffic accepted by firewall
To view the traffic monitor
1.
Choose Reports from the main menu and click Traffic Monitor.
The Traffic Monitor page opens.
2.
To view the traffic monitor report, select the interface from the drop-down list.
3.
To set the monitoring time, Click Settings.
The Traffic Monitor Settings page opens.
4.
Enter the time in the Sample monitoring data every text box.
5.
Click Apply.
Page 252 / 342
14
Viewing Reports
252
Nokia IP45 Security Platform User’s Guide v4.0
Viewing Active Computers
The Active Computers option in the IP45 GUI allows you to view the currently active computers
on your network.
In the Active Computers report, licensed computers are shown in green. Computers that did not
pass through the firewall (and therefore not a node) are displayed in blue. Computers that
attempt to exceed the license are displayed in red and are blocked from accessing the Intranet. If
a formerly active computer does not pass traffic through the firewall for a certain period of time,
it is considered inactive, and is shown in blue. Another node can pass through the firewall
instead.
To view the active computers
1.
Choose Reports from the main menu and click Active Computers.
The Active Computers page opens.
If your network exceeds the maximum number of computers allowed by your license, a
warning message appears, and the computers that exceed the node limit are marked in red.
These computers might not be able to access the Internet through IP45.
Note
To increase the number of computers that your license allows, you must upgrade your
product.
Click Refresh to refresh the display.
Page 253 / 342
Viewing Reports on the Nokia IP45 Security Platform
Nokia IP45 Security Platform User’s Guide v4.0
253
When you configure high-availability feature, the GUI page for Active Computers appears
as follows:
2.
To view node limit information:
a.
Click Node Limit.
The Node Limit window opens with the installed software product displaying the number of
nodes used.
b.
Click Close to close the window.
Viewing Connections
The Connections option in the IP45 GUI allows you to view the currently active connections
between your network and the external world. The active connections are displayed as a list,
specifying source IP address, destination IP address and port, and the protocol used (TCP, UDP,
and so on).
Page 254 / 342
14
Viewing Reports
254
Nokia IP45 Security Platform User’s Guide v4.0
To view active connections
1.
Choose Reports from the main menu, and then click Connections.
The Connections page opens.
2.
Do the following:
±
Click Refresh to refresh the display.
±
To view information about the destination computer, click the corresponding Port.
The IP45 queries the Internet WHOIS server, and a window displays the name of the entity
to whom the IP address is registered and their contact information.
Viewing the Diagnostics Summary
You can view the diagnostics summary for your device from the IP45 GUI. The diagnostics
summary provides useful information about your device, such as node limit, network status,
primary network status, secondary network status, my network status, setup state, users state,
security, and subscription services. Apart from this, you can get the following basic information
about your IP45 from the diagnostics summary.
To view the diagnostics summary
1.
Choose Setup from the main menu, and click Tools.
The Tools page opens.
2.
Click Diagnostics on the right of the page.
Page 255 / 342
Viewing Reports on the Nokia IP45 Security Platform
Nokia IP45 Security Platform User’s Guide v4.0
255
3.
The Diagnostics window opens.The following figure shows a sample section of the
diagnostics window that displays information about your IP45.
4.
Use the scroll bar to view more information.

Rate

3.5 / 5 based on 2 votes.

Popular Nokia Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top