1. Home
    2. /
  2. Manuals
    3. /
  3. Nokia
    4. /
  4. IP45
    5. /
  5. 17
Page 81 / 342 Scroll up to view Page 76 - 80
Manually Configuring the Internet Setting
Nokia IP45 Security Platform User’s Guide v4.0
81
To connect using a DHCP connection
1.
Select DHCP (Dynamic IP) from the Internet Connection Method window
.
2.
Click Next.
The Confirmation message appears.
3.
Click Next.
The Connecting message appears while the system attempts to connect to the Internet
through the DHCP connection. At the end of the connection process, the Connected message
appears.
Manually Configuring the Internet Setting
You can configure the Internet settings for your IP45 manually.
To configure the Internet connection
1.
Proceed as per steps 1 and 2 in
“Using the Setup Wizard”
on page 73 to connect using PPTP
and PPPoE.
2.
Click Cancel on the Internet Setup wizard.
Page 82 / 342
5
Connecting to the Internet with the Nokia IP45 Security Platform
82
Nokia IP45 Security Platform User’s Guide v4.0
The Welcome page is displayed.
3.
Choose Network from the main menu.
The Internet page opens.
4.
Click Edit next to Primary.
The Internet Setup page with a list of connection type options appears.
5.
Select the Connection Type.
The display changes according to the connection type you select. Perform the following
procedures in accordance with the connection type you choose.
To use a LAN connection
The following steps provide details about the LAN connection.
1.
Select LAN connection from the Internet Setup page at Connection Type.
2.
Click
Show Advanced Settings
.
Page 83 / 342
Manually Configuring the Internet Setting
Nokia IP45 Security Platform User’s Guide v4.0
83
The following page opens.
3.
Select the Port: WAN, WAN2, Serial, None.
4.
If you do not want the IP45 to obtain an IP address automatically by using DHCP, do the
following:
a.
Uncheck the Obtain IP address automatically (using DHCP) check box.
b.
Type the IP address that your service provider provides.
c.
Select the subnet mask from the drop-down list that applies to the IP address you Typed.
d.
Type the IP address of the default gateway of your service provider.
5.
To assign an IP address automatically by using DHCP, but not configure DNS servers
automatically, do the following:
a.
Uncheck the Obtain DNS Servers automatically check box.
b.
Type the Primary DNS server IP address.
c.
Type the Secondary DNS server IP address.
d.
Type the WINS Server IP address.
6.
Select the Shape Upstream and Shape Downstream to enable traffic shaper.
7.
Type the Upstream Link Rate value in kbps.
8.
Type the Downstream Link Rate value in kbps, slightly lower than the Upstream Link Rate
value.
Page 84 / 342
5
Connecting to the Internet with the Nokia IP45 Security Platform
84
Nokia IP45 Security Platform User’s Guide v4.0
9.
Click
Show Advanced Settings
.
10.
Type the maximum transmission unit (MTU-1500)
11.
Type the Host Name.
This field is optional: some ISPs might require it, and they provide the host name.
12.
Click Apply.
To use a cable modem connection
1.
Select Cable Modem type from the Internet Setup page at Connection Type.
2.
Click
Show Advanced Settings
.
The Internet Setup page opens.
3.
Enter the Host Name.
This field is optional: some ISPs might require it, and they provide the host name.
4.
Complete the remaining fields as per the information provided in the procedure
“To use a
LAN connection”
on page 82.
5.
Click Apply.
To use a PPPoE connection
1.
Choose PPPoE from the Internet Setup page at Connection Type.
2.
Click
Show Advanced Settings
.
Page 85 / 342
Manually Configuring the Internet Setting
Nokia IP45 Security Platform User’s Guide v4.0
85
The following page opens:
3.
Enter the following information:
±
Enter your Username and Password, and confirm the Password.
±
Enter the service name as given by your service center
Note
If your service center did not provide you with a service name, leave this text box empty.
You can set the maximum transmission unit size (MTU). Nokia recommends that you leave
this field empty. However, to modify the default MTU, consult with your service provider.
4.
If you are not using automatic configuration of DNS servers, do the following:
±
Uncheck the Obtain Domain Name Servers automatically check box
±
Enter the Primary DNS server IP address.
±
Enter the Secondary DNS server IP address.
±
Enter the WINS Server IP address.

Rate

3.5 / 5 based on 2 votes.

Popular Nokia Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top