1. Home
    2. /
  2. Manuals
    3. /
  3. Netis
    4. /
  4. WF-2404
    5. /
  5. 2
Page 6 / 63 Scroll up to view Page 1 - 5
300Mbps Wireless-N Broadband Router
User Manual
5
4.12.4.
WOL
.............................................................................................................................
59
4.12.5.
System Logs
..................................................................................................................
59
4.12.6.
Remote Management
....................................................................................................
60
4.12.7.
Factory Defaults
...........................................................................................................
60
4.12.8.
Reboot
..........................................................................................................................
60
4.13.
A
BOUT
...................................................................................................................................
61
5.
TROUBLESHOOTING
..............................................................................................................
61
Page 7 / 63
300Mbps Wireless-N Broadband Router
User Manual
6
1.
Introduction
1.1.
Product Overview
The 300Mbps Wireless-N Broadband Router is dedicated to Small Office/Home Office (SOHO)
Wireless network solution. It is 4 in 1 network device, which combines wireless access point,
firewall, 4-port Switch and the NAT-Router. It provides up to 300Mbps data transmission rate
in 2.4GHz frequency, complies with IEEE 802.11n, IEEE 802.11g and IEEE802.11b and
backwards compatible with all IEEE 802.11n/g/b devices. And the router also supports wireless
LAN up to 128-bit WEP, WPA/WPA2 encryption security. The 300Mbps Wireless-N
Broadband Router also provides WEB and Remote Management and system log so that
network administrators can manage and monitor the network in real time.
The 300Mbps Wireless-N Broadband Router also provides a hardware WPS (Wi-Fi protected
setup) button, which helps you setup a secure wireless network in a snap. The button lets you
activate the wireless protection easily
1.2.
Main Features
Comply with IEEE802.11n/g/b, IEEE802.3 10Base-T, IEEE802.3u 100Base-TX
standards
Support MIMO technology with 2 transmit and 2 receive, up to 300Mbps wireless LAN
data transfer rates
Support DHCP Client, PPPoE Client, Static IP, L2TP, PPTP
Support multi-wireless mode: AP, WDS, AP+WDS, repeater, client, etc.
Support static ARP, MAC filtering, IP access control, DNS filter
Support FTP, PPTP and L2TP pass through
Support UPNP (universal plug and play)
Upgradeable firmware for future functions
WPS button can easily setup a secure network
Support WMM
Support data encryption mode: WEP, WPA, WPA2
Support DMZ
Page 8 / 63
300Mbps Wireless-N Broadband Router
User Manual
7
1.3.
Supporting Standard and Protocol
IEEE 802.11b/g/n
IEEE 802.11e
IEEE 802.11h
IEEE 802.11k
IEEE 802.11i
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
1.4.
Working Environment
Temperature
0°
to 40°
C (operating)
-40°
to 70°
C (storage)
Humidity
10% to 90 % non-condensing (operating)
5% to 90% non-condensing (storage)
Power
DC 9V
Page 9 / 63
300Mbps Wireless-N Broadband Router
User Manual
8
2.
Hardware Installation
2.1.
System Requirement
Minimum Requirements:
Broadband (DSL/Cable) modem and service with Ethernet port
802.11n b/g/n wireless adapter or Ethernet adapter and cable for each computer
Internet Explorer® 5.0, Firefox® 2.0 or Safari® 1.4 or higher
2.2.
Panel
Front panel
Figure 2-1
LED
Function
PWR
ON
Power on
Off
Power off
WPS
Flashing
slowly
WPS is running
OFF
WPS is not running
SYS
ON and Off
Abnormal
Flashing
Normal
WLAN
Flashing
Wireless data transmitting
Off
Wireless off
WAN
On
WAN Connection normal
Flashing
Data transmitting
Off
WAN Connection abnormal
LAN
On
LAN Connection normal
Flashing
Data transmitting
Page 10 / 63
300Mbps Wireless-N Broadband Router
User Manual
9
Off
LAN Connection abnormal
Rear panel
Figure 2-2
Description
Function
PWR
Connect to Power adapter, please don’t use the unknown
power adapter, otherwise your device may be damaged.
LAN
Connect with computer NIC or Ethernet device
WAN
Internet access
Reset
Restore settings
2.3.
Restore to factory configuration
If the router ever freezes in a setting change process or if you can
’
t access it because you can
’
t
remember the IP you have given it or other problem, you may have to utilize the reset button on
the back of the router to put it back to factory settings. You have to press and hole this button
for a few seconds (2-6s) with a pencil when it is working, then release and it will restore
settings to the factory configuration.
The other way to restore factory settings is through the same user interface used in setup.
Click on ‘System management’
-
‘Restore’, and click on the ‘Restore’ button.
2.4.
Hardware Installation Procedures
The procedures to install the 300Mbps Wireless-N Broadband Router please refers to the
following picture

Rate

3.5 / 5 based on 2 votes.

Popular Netis Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top