Specify Initial Settings

21

N300 WiFi Router

The screen adjusts:

The router automatically detects the information in the following fields:

•

Connection Type

. This field indicates the connection type that is detected.

•

Router’s IPv6 Address on WAN

. This field shows the IPv6 address that is acquired

for the router’s WAN (or Internet) interface. The number after the slash (/) is the length

of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no

address is acquired, the field displays Not Available.

•

Router’s IPv6 Address on LAN

. This field shows the IPv6 address that is acquired

for the router’s LAN interface. The number after the slash (/) is the length of the prefix,

which is also indicated by the underline (_) under the IPv6 address. If no address is

acquired, the field displays Not Available.

6.

Select an IP Address Assignment radio button:

•

Use DHCP Server

. This method passes more information to LAN devices, but some

IPv6 systems might not support the DHCv6 client function.

•

Auto Config

. This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your home

network (the LAN).

7.

(Optional) Select the

Use This Interface ID

check box and specify the interface ID to be

used for the IPv6 address of the router’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC

address.

8.

Click the

Apply

button.

Your settings are saved.

Specify Initial Settings

22

N300 WiFi Router

Use Auto Config for an IPv6 Internet Connection



To set up an IPv6 Internet connection through auto configuration:

1.

Launch a web browser from a computer or wireless device that is connected to the

network.

2.

In the address field of the web browser, enter

www.routerlogin.net

or

www.routerlogin.com

.

A login screen displays.

3.

Enter the router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4.

Select

ADVANCED > Advanced Setup > IPv6

.

The IPv6 screen displays.

5.

In the

Internet Connection Type

list, select

Auto Config

.

The screen adjusts:

The router automatically detects the information in the following fields:

•

Router’s IPv6 Address on WAN

. This field shows the IPv6 address that is acquired

for the router’s WAN (or Internet) interface. The number after the slash (/) is the length

of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no

address is acquired, the field displays Not Available.

•

Router’s IPv6 Address on LAN

. This field shows the IPv6 address that is acquired

for the router’s LAN interface. The number after the slash (/) is the length of the prefix,

which is also indicated by the underline (_) under the IPv6 address. If no address is

acquired, the field displays Not Available.

6.

(Optional) In the

DHCP User Class (If Required)

field, enter a host name.

Specify Initial Settings

23

N300 WiFi Router

Most people can leave this field blank, but if your ISP gave you a specific host name,

enter it here.

7.

(Optional) In the

DHCP Domain Name (If Required)

field, enter a domain name.

You can type the domain name of your IPv6 ISP. Do not enter the domain name for the

IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type xxx.yyy.zzz

as the domain name. If your ISP provided a domain name, type it in this field. For

example, Earthlink Cable might require a host name of home, and Comcast sometimes

supplies a domain name.

8.

Select an IP Address Assignment radio button:

•

Use DHCP Server

. This method passes more information to LAN devices, but some

IPv6 systems might not support the DHCv6 client function.

•

Auto Config

. This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your home

network (the LAN).

9.

(Optional) Select the

Use This Interface ID

check box and specify the interface ID that you

want to be used for the IPv6 address of the router’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC

address.

10.

Click the

Apply

button.

Your settings are saved.

Set Up a 6to4 Tunnel IPv6 Internet Connection

The remote relay router is the router to which your router creates a 6to4 tunnel. Make sure

that the IPv4 Internet connection is working before you apply the 6to4 tunnel settings for the

IPv6 connection.



To set up an IPv6 Internet connection by using a 6to4 tunnel:

1.

Launch a web browser from a computer or wireless device that is connected to the

network.

2.

In the address field of the web browser, enter

www.routerlogin.net

or

www.routerlogin.com

.

A login screen displays.

3.

Enter the router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4.

Select

ADVANCED > Advanced Setup > IPv6

.

The IPv6 screen displays.

Specify Initial Settings

24

N300 WiFi Router

5.

In the

Internet Connection Type

list, select

6to4 Tunnel

.

The screen adjusts:

The router automatically detects the information in the Router’s IPv6 Address on LAN

field. This field shows the IPv6 address that is acquired for the router’s LAN interface. The

number after the slash (/) is the length of the prefix, which is also indicated by the

underline (_) under the IPv6 address. If no address is acquired, the field displays Not

Available.

6.

Select a Remote 6to4 to Relay Router radio button:

•

Auto

. Your router uses any remote relay router that is available on the Internet. This is

the default setting.

•

Static IP Address

. Enter the static IPv4 address of the remote relay router. Your IPv6

ISP usually provides this address.

7.

Select an IP Address Assignment radio button:

•

Use DHCP Server

. This method passes more information to LAN devices, but some

IPv6 systems might not support the DHCv6 client function.

•

Auto Config

. This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your home

network (the LAN).

8.

(Optional) Select the

Use This Interface ID

check box and specify the interface ID that you

want to be used for the IPv6 address of the router’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC

address.

9.

Click the

Apply

button.

Your settings are saved.

Specify Initial Settings

25

N300 WiFi Router

Set Up a Pass Through IPv6 Internet Connection

In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and

WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header packets.



To set up a pass-through IPv6 Internet connection:

1.

Launch a web browser from a computer or wireless device that is connected to the

network.

2.

In the address field of the web browser, enter

www.routerlogin.net

or

www.routerlogin.com

.

A login screen displays.

3.

Enter the router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4.

Select

ADVANCED > Advanced Setup > IPv6

.

The IPv6 screen displays.

5.

In the

Internet Connection Type

list, select

Pass Through

.

The screen adjusts, but no additional fields display.

6.

Click the

Apply

button.

Your settings are saved.

Set Up a Fixed IPv6 Internet Connection



To set up a fixed IPv6 Internet connection:

1.

Launch a web browser from a computer or wireless device that is connected to the

network.

2.

In the address field of the web browser, enter

www.routerlogin.net

or

www.routerlogin.com

.

A login screen displays.

3.

Enter the router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4.

Select

ADVANCED > Advanced Setup > IPv6

.

The IPv6 screen displays.

5.

In the

Internet Connection Type

list, select

Fixed

.