Page 56 / 134 Scroll up to view Page 51 - 55
NETGEAR Wireless-N Router WNR2000 User Manual
3-2
Restricting Access From Your Network
v1.0, June 2008
To block access to Internet sites:
1.
Select
Block Sites
under Content Filtering in the main menu. The Block Sites screen displays.
2.
Enable keyword blocking by selecting either
Per Schedule
or
Always
.
To block by schedule, be sure to specify a time period in the Schedule screen. For information
about scheduling, see
“Scheduling Blocking” on page 3-5
.
Block all access to Internet browsing during a scheduled period by entering a dot (
.
) as the
keyword, and then set a schedule in the Schedule screen.
3.
Add a keyword or domain by entering it in the keyword field and clicking
Add Keyword
. The
keyword or domain name then appears the
Block sites containing these keywords or domain
names
list.
Delete a keyword or domain name by selecting it from the list and clicking
Delete Keyword
.
4.
You can specify one trusted user, which is a computer that is exempt from blocking and
logging. Specify a trusted user by entering that computer’s IP address in the
Trusted IP
Address
fields.
Figure 3-1
Page 57 / 134
NETGEAR Wireless-N Router WNR2000 User Manual
Restricting Access From Your Network
3-3
v1.0, June 2008
Since the trusted user is identified by IP address, you should configure that computer with a
fixed IP address.
5.
Click
Apply
to save all your settings in the Block Sites screen.
Blocking Access to Internet Services
The WNR2000 router allows you to block the use of certain Internet services by computers on
your network. This is called service blocking or port filtering. Services are functions performed by
server computers at the request of client computers. For example, Web servers serve Web pages,
time servers serve time and date information, and game hosts serve data about other players’
moves. When a computer on your network sends a request for service to a server computer on the
Internet, the requested service is identified by a service or port number. This number appears as the
destination port number in the transmitted IP packets. For example, a packet that is sent with
destination port number 80 is an HTTP (Web server) request.
To block access to Internet services:
1.
Select
Block Services
under Content Filtering in the main menu. The Block Services screen
displays.
2.
Enable service blocking by selecting either
Per Schedule
or
Always
, and then click
Apply
.
To block by schedule, be sure to specify a time period in the Schedule screen. For information
about scheduling, see
“Scheduling Blocking” on page 3-5
.
Figure 3-2
Page 58 / 134
NETGEAR Wireless-N Router WNR2000 User Manual
3-4
Restricting Access From Your Network
v1.0, June 2008
3.
Specify a service for blocking by clicking
Add
. The Block Services Setup screen displays.
4.
From the
Service Type
list, select the application or service to be allowed or blocked. The list
already displays several common services, but you are not limited to these choices. To add any
additional services or applications that do not already appear, select
User Defined
. To define a
service, first you must determine which port number or range of numbers is used by the
application. The service port numbers for many common protocols are defined by the Internet
Engineering Task Force (IETF) and published in RFC1700, “Assigned Numbers.” Service
numbers for other applications are typically chosen from the range 1024 to 65535 by the
authors of the application. You can often determine port number information by contacting the
publisher of the application, by asking user groups or newsgroups, or by searching.
Enter the starting port and ending port numbers. If the application uses a single port
number, enter that number in both fields.
If you know that the application uses either TCP or UDP, select the appropriate protocol. If
you are not sure, select
Both
.
5.
Select the radio button for the IP address configuration you want to block, and then enter the
IP addresses in the appropriate fields.
6.
Click
Add
to enable your Block Services Setup selections.
Figure 3-3
Page 59 / 134
NETGEAR Wireless-N Router WNR2000 User Manual
Restricting Access From Your Network
3-5
v1.0, June 2008
Blocking Services by IP Address Range
In the Filter Services For area, you can block the specified service for a single computer, a range of
computers (having consecutive IP addresses), or all computers on your network.
Scheduling Blocking
The WNR2000 router allows you to specify when blocking is enforced.
To schedule blocking:
1.
Select
Schedule
under Content Filtering in the main menu. The Schedule screen displays.
2.
Configure the schedule for blocking keywords and services.
a.
Days to Block
. Select days on which you want to apply blocking by selecting the
appropriate check boxes. Select
Every Day
to select the check boxes for all days. Click
Apply
.
b.
Time of Day to Block
. Select a start and end time in 24-hour format. Select
All Day
for
24-hour blocking. Click
Apply
.
Figure 3-4
Page 60 / 134
NETGEAR Wireless-N Router WNR2000 User Manual
3-6
Restricting Access From Your Network
v1.0, June 2008
Be sure to select your time zone in the E-mail screen as described in
“Setting the Time Zone”
on page 3-9
.
3.
Click
Apply
to save your settings.
Viewing Logs of Web Access or Attempted Web Access
The log is a detailed record of the websites you have accessed or attempted to access. Up to
128 entries are stored in the log. Log entries appear only when keyword blocking is enabled and no
log entries are made for the trusted user.
Select
Logs
under Content Filtering in the main menu. The Logs screen displays.
Table 3-1
describes the log entries.
Figure 3-5
Table 3-1.
Log Entry Descriptions
Field
Description
Date and time
The date and time the log entry was recorded.
Source IP
The IP address of the initiating device for this log entry.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top