Page 31 / 82
Scroll up to view Page 26 - 30
WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
Making Changes
3-3
v1.1, May 2008
The Configuration Assistant lists all the WNHDE111 units it finds
.
2.
To configure a unit on the list, do one of the following:
•
Right-click its name to display a menu of settings you can change.
Figure 3-9
Figure 3-10
Names of units discovered
Page 32 / 82
WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
3-4
Making Changes
v1.1, May 2008
•
Double-click the name of the unit in the discovery list to open the login menu. The default
password is
password
.
Refer to the topics in this guide, or the online help pages for further information about settings.
Using the Web Browser Interface
You can use a web browser to log in to a WNHDE111 and view or changes its settings. To access
the web browser interface:
1.
When connected directly to the unit via an Ethernet cable, you can open the web browser
interface by typing
in the address field of your browser, and then
press Enter. The login window above opens:
2.
Enter
password
for the password.
The Checking for Firmware Updates screen appears unless you previously cleared the
Check
for New Version Firmware Upon Log-in
check box in the Firmware Update screen.
If the unit discovers a newer version of software, you are asked if you want to upgrade to the
new software is available, the no new firmware message displays.
Figure 3-11
Page 33 / 82
WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
Making Changes
3-5
v1.1, May 2008
If the unit is connected to the Internet, you can select
Knowledge Base
or
Documentation
under Web Support in the main menu to view support information or the user manual.
If you do not click
Logout
, the unit will wait for 5 minutes after no activity before it
automatically logs you out. You can adjust this timeout setting on the Tools Admin page.
Using Automatic Firmware Update upon Login
The Checking for Firmware Updates screen appears when you log in unless you previously cleared
the Check for Updated Firmware Upon Log-in check box. For information about checking for new
firmware through the main menu, see
“Firmware Update” on page 3-13
.
Figure 3-12
Note:
If the
Check for New Version Upon Log-in
check box is selected, the home
page is the Firmware Version Check screen. Otherwise, it is the Setup Wizard
screen.
Page 34 / 82
WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
3-6
Making Changes
v1.1, May 2008
1.
Allow the update feature to check for firmware updates more recent than the firmware
currently installed in your Wireless-N AccessPoint/Bridge.
If the update feature discovers a newer version of software, you are asked if you want to
upgrade to the new software.
2.
To download and install a newer version, click
Yes
.
The update feature automatically installs the most recent firmware.
Figure 3-13
Figure 3-14
Figure 3-15
Page 35 / 82
WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
Making Changes
3-7
v1.1, May 2008
If no new firmware is available, the following message appears.
Warning:
Do not try to go online, turn off the bridge, shut down the computer, or do
anything else to the bridge until the bridge finishes downloading!
Figure 3-16
19216811.live