Page 21 / 114 Scroll up to view Page 16 - 20
Genie Basic Settings
21
N600 Wireless Dual Band Gigabit Router WNDRMAC
Internet Service Provider Encapsulation
. ISP types. The choices are PPPoE, PPTP, or
L2TP.
Login
. The login name provided by your ISP. This is often an email address.
Password
. The password that you use to log in to your ISP.
Idle Timeout (In minutes)
. If you want to change the login timeout, enter a new value in
minutes. This determines how long the router keeps the Internet connection active after
there is no Internet activity from the LAN. Entering a value of 0 (zero) means never log
out.
Internet IP Address
.
Get Dynamically from ISP
. Your ISP uses DHCP to assign your IP address. Your ISP
automatically assigns these addresses.
Use Static IP Address
. Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned. The gateway is the ISP’s router to which your router will
connect.
Domain Name Server (DNS) Address
. The DNS server is used to look up site addresses
based on their names.
Get Automatically from ISP
. Your ISP uses DHCP to assign your DNS servers. Your ISP
automatically assigns this address.
Use These DNS Servers
. If you know that your ISP does not automatically transmit DNS
addresses to the router during login, select this option, and enter the IP address of your
ISP’s primary DNS server. If a secondary DNS server address is available, enter it also.
Router MAC Address
. The Ethernet MAC address used by the router on the Internet port.
Some ISPs register the MAC address of the network interface card in your computer when
your account is first opened. They will then accept traffic only from the MAC address of that
computer. This feature allows your router to use your computer’s MAC address (this is also
called cloning).
Use Default Address
. Use the default MAC address.
Use Computer MAC Address
. The router will capture and use the MAC address of the
computer that you are now using. You have to use the one computer that is allowed by
the ISP.
Use This MAC Address
. Enter the MAC address that you want to use.
Downloaded from
www.Manualslib.com
manuals search engine
Page 22 / 114
Genie Basic Settings
22
N600 Wireless Dual Band Gigabit Router WNDRMAC
Attached Devices
You can view all computers or devices that are currently connected to your network here.
From the Basic Home screen, select
Attached Devices
to display the following screen:
Wired devices are connected to the router with Ethernet cables. Wireless devices have joined
the wireless network.
#
(number). The order in which the device joined the network.
IP Address
. The IP address that the router assigned to this device when it joined the
network. Note that this number can change if a device is disconnected and rejoins the
network.
MAC Address
. The unique MAC address for each device does not change. The MAC
address is typically shown on the product label.
Device Name
. If the device name is known, it is shown here.
You can click
Refresh
to update this screen.
Downloaded from
www.Manualslib.com
manuals search engine
Page 23 / 114
Genie Basic Settings
23
N600 Wireless Dual Band Gigabit Router WNDRMAC
Parental Controls
The first time you select Parental Controls from the Basic Home screen, you are
automatically directed to the Internet, where you can learn more about Live Parental Controls
or download the application. The following screen displays:
ReadyShare USB Storage
You can view information about a USB storage device that is connected to the router’s USB
port here. From the Basic Home screen, select
ReadyShare
to display the USB Storage
(Basic Settings) screen:
Downloaded from
www.Manualslib.com
manuals search engine
Page 24 / 114
Genie Basic Settings
24
N600 Wireless Dual Band Gigabit Router WNDRMAC
This screen displays the following:
Network/Device Name
. The default is \\readyshare. This is the name used to access the
USB device connected to the router.
Available Network Folders
. The folders on the USB device.
Share Name
. If only one device is connected, the default share name is USB_Storage.
You can click the name shown or you can type it in the address field of your Web browser.
If Not Shared is shown, the default share has been deleted and no other share for the
root folder exists. Click the link to change this setting.
Read/Write Access
. Shows the permissions and access controls on the network folder:
All – no password (the default) allows all users to access the network folder. The user
name (account name) for All – no password is guest. The password for
admin
is the
same one that you use to log in to the router. By default, it is
password
.
Folder Name
. Full path used by the network folder.
Volume Name
. Volume name from the storage device (either USB drive or HDD).
Total/Free Space
. Shows the current utilization of the storage device.
Edit
. Click the
Edit
button to edit the Available Network Folders settings.
Safely Remove a USB Device
. Click to safely remove the USB device attached to your
router.
You can click
Refresh
to update this screen.
For more information about USB storage, see
Chapter 5, USB Storage
.
Basic Wireless Settings
The Wireless Settings screen lets you view or configure the wireless network setup.
The WNDRMAC router comes with preset security. This means that the Wi-Fi network name
(SSID), network key (password), and security option (encryption protocol) are preset in the
factory. You can find the preset SSID and password on the bottom of the unit.
Note:
The preset SSID and password are uniquely generated for every
device to protect and maximize your wireless security.
To view or change basic wireless settings:
NETGEAR recommends that you do not change your preset security settings
.
If you do
decide to change your preset security settings, make a note of the new settings and store it in
a safe place where you can easily find it.
Downloaded from
www.Manualslib.com
manuals search engine
Page 25 / 114
Genie Basic Settings
25
N600 Wireless Dual Band Gigabit Router WNDRMAC
If you use a wireless computer to change the wireless network name (SSID) or other wireless
security settings, you are disconnected when you click Apply. To avoid this problem, use a
computer with a wired connection to access the router.
1.
On the Basic Home screen, select
Wireless
to display the Wireless Settings screen.
You can scroll down to view more settings. The screen sections, settings, and procedures
are explained in the following sections.
2.
Make any changes that are needed, and click
Apply
to save your settings.
3.
Set up and test your wireless devices and computers to make sure that they can connect
wirelessly. If they do not, check the following:
Is your wireless device or computer connected to your network or another wireless
network in your area? Some wireless devices automatically connect to the first open
network (without wireless security) that they discover.
Does your wireless device or computer show up on the Attached Devices screen? If it
does, then it is connected to the network.
If you are not sure what the network name (SSID) or password is, look on the label on
the bottom of your router.
Wireless Settings Screen Fields
Region Selection
The location where the router is used. Select from the countries in the list. Note that in the
United States, the region is fixed to United States and is not interchangeable.
Wireless Network
2.4 GHz b/g/n and 5.0 GHz a/n
The b/g/n and a/n notation references the 802.11 standards of conformance. For example,
2.4 b/g/n conforms to 802.11b, 802.11g, and 802.11n at 2.4 GHz radio frequency.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top