Page 151 / 154 Scroll up to view Page 146 - 150
151
A
A.
Supplemental Information
This appendix includes technical information about your router.
This appendix covers the following topics:
Factory Settings
Technical Specifications
Page 152 / 154
Supplemental Information
152
N750 WiFi Router
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar object
to press and hold the
Reset
button on the bottom of the router for at least seven seconds.
The router resets and returns to the factory configuration settings shown in the following
table.
Table 3.
Factory default settings
Feature
Default Behavior
Router login
User login URL
www.routerlogin.com or www.routerlogin.net
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
WAN MAC address
Use default hardware address
WAN MTU size
1500
Port speed
AutoSensing
Local network
(LAN)
LAN IP
192.168.1.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.1.2 to 192.168.1.254
DHCP starting IP address
192.168.1.2
DHCP ending IP address
192.168.1.254
DMZ
Disabled
Time zone
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
Time adjusted for daylight saving
time
Disabled
SNMP
Disabled
Page 153 / 154
Supplemental Information
153
N750 WiFi Router
Firewall
Inbound (communications coming
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
Enabled (all)
Source MAC filtering
Disabled
Wireless
Wireless communication
Enabled
SSID name
See the product label
Security
WPA2-PSK (AES)
Broadcast SSID
Enabled
Transmission speed
Auto
1
Country/region
United States in the US; otherwise, varies by region
RF channel
Auto for 2.4 GHz, CH 44 for WW SKU and CH 153 for
North America SKU
Operating mode
Up to 300 Mbps at 2.4 GHz, 867 Mbps at 5 GHz
1. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate
Table 3.
Factory default settings
(continued)
Feature
Default Behavior
Page 154 / 154
Supplemental Information
154
N750 WiFi Router
Technical Specifications
Table 4.
Router specifications
Feature
Description
Data and routing protocols
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP,
and SMB
Power adapter
North America: 100–240V, 50/60 Hz input
UK, Australia: 100–240V, 50/60 Hz, input
Europe: 100–240V, 50/60 Hz input
All regions (output): 12V/1.5 ADC output
Dimensions
217 x 148 x 33 mm (8.5 x 5.8 x 1.3 in.)
Weight
410 g (0.9 lb)
Operating temperature
0° to 40°C
(32º to 104ºF)
Operating humidity
90% maximum relative humidity, noncondensing
Electromagnetic emissions
NAS (FCC), PAS(IC), and PAS(CE)
LAN
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45
WAN
10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45
Wireless
Maximum wireless signal rate complies with the IEEE 802.11 standard.
1
1. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Radio data rates
Auto Rate Sensing
Data encoding standards
IEEE® 802.11 b/g/n 2.4 GHz
IEEE® 802.11 a/n 5.0 GHz
Maximum computers per
wireless network
Limited by the amount of wireless network traffic generated by each node
(typically 50–70 nodes)
Operating frequency range
N900 WiFI
450 Mbps @ 2.4 GHz
450 Mbps @ 5 GHz
802.11 security
WPA2-PSK and WPA/WPA2

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top