1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. WNDR4300v2
    5. /
  5. 25
Page 121 / 154 Scroll up to view Page 116 - 120
Manage Your Network
121
N750 WiFi Router
7.
To change the polling frequency, enter a time in seconds in the
Poll Interval
field and click
the
Set Interval
button.
To stop the polling entirely, click the
Stop
button.
Check the Internet Connection Status
To check the Internet connection status:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Click the
ADVANCED
tab.
The ADVANCED Home screen displays.
5.
In the Internet Port pane, click the
Connection Status
button.
The following information displays:
•
IP Address
. The IP address that is assigned to the router.
•
Subnet Mask
. The subnet mask that is assigned to the router.
•
Default Gateway
. The IP address for the default gateway that the router
communicates with.
•
DHCP Server
. The IP address for the Dynamic Host Configuration Protocol server
that provides the TCP/IP configuration for all the computers that are connected to the
router.
•
DNS Server
. The IP address of the Domain Name Service server that provides
translation of network names to IP addresses.
•
Lease Obtained
. The date and time when the lease was obtained.
Page 122 / 154
Manage Your Network
122
N750 WiFi Router
•
Lease Expires
. The date and time that the lease expires.
6.
To return the status of all items to 0, click the
Release
button.
7.
To refresh the screen, click the
Renew
button.
8.
To exit the screen, click the
Close Window
button.
View and Manage Logs of Router Activity
The log is a detailed record of the websites you accessed or attempted to access and other
router actions. Up to 256
entries are stored in the log.
To view and manage logs:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Administration > Logs
.
5.
To customize the logs, scroll down and clear or select the check boxes.
6.
To refresh the log screen, click the
Refresh
button.
Page 123 / 154
Manage Your Network
123
N750 WiFi Router
7.
To clear the log entries, click the
Clear Log
button.
8.
To email the log immediately, click the
Send Log
button.
Monitor Internet Traffic
Traffic metering allows you to monitor the volume of Internet traffic that passes through the
router Internet port. You can set limits for traffic volume.
To monitor Internet traffic:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > Traffic Meter
.
Scroll to view
more settings
5.
Select the
Enable Traffic Meter
check box.
6.
(Optional) Control the volume of Internet traffic.
You can use either the traffic volume control feature or the connection time control
feature:
Page 124 / 154
Manage Your Network
124
N750 WiFi Router
•
Select the
Traffic volume control
by
radio button and then select one of the
following options:
-
No Limit
. No restriction is applied when the traffic limit is reached.
-
Download only
. The restriction is applied to incoming traffic only.
-
Both Directions
. The restriction is applied to both incoming and outgoing traffic.
•
Select the
Connection time control
radio button and enter the allowed hours in the
Monthly limit
field.
7.
(Optional) If your ISP charges for extra data volume when you make a new connection,
enter the extra data volume in MB in the
Round up data volume for each connection by
field.
8.
In the Traffic Counter section, set the traffic counter to begin at a specific time and date.
To start the traffic counter immediately, click the
Restart Counter Now
button.
9.
In the Traffic Control section, specify whether the router should issue a warning message
before the monthly limit of Mbytes or hours is reached.
By default, the value is 0 and no warning message is issued. You can select one of the
following to occur when the limit is attained:
•
The Internet LED blinks.
•
The Internet connection is disconnected and disabled.
10.
Click the
Apply
button.
The Internet Traffic Statistics section helps you to monitor the data traffic.
11.
To update the Traffic Statistics section, click the
Refresh
button.
12.
To display more information about the data traffic on your router and to change the poll
interval, click the
Traffic Status
button.
Custom Static Routes
Typically, you do not need to add static routes unless you use multiple routers or multiple IP
subnets on your network.
As an example of when a static route is needed, consider the following case:
•
Your main Internet access is through a cable modem to an ISP.
•
Your home network includes an ISDN router for connecting to the company where you
are employed. This router’s address on your LAN is 192.168.1.100.
•
Your company’s network address is 134.177.0.0.
When you set up your router, two implicit static routes were created. A default route was
created with your ISP as the gateway, and a second static route was created to your local
network for all 192.168.1.x addresses. With this configuration, if you try to access a device on
the 134.177.0.0 network, your router forwards your request to the ISP. The ISP forwards your
request to the company where you are employed, and the company firewall is likely to deny
the request.
Page 125 / 154
Manage Your Network
125
N750 WiFi Router
In this case you must define a static route, telling your router to access 134.177.0.0 through
the ISDN router at 192.168.1.100. Here is an example:
•
The
Destination IP Address
and
IP Subnet Mask
fields specify that this static route
applies to all 134.177.x.x addresses.
•
The
Gateway IP Address
field specifies that all traffic for these addresses will be
forwarded to the ISDN router at 192.168.1.100.
•
A metric value of 1 works because the ISDN router is on the LAN.
•
The
Private
check box is selected only as a precautionary security measure in case RIP
is activated.
Set Up a Static Route
To set up a static route:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > Static Routes
.
The Static Routes screen displays.
5.
Click the
Add
button.
6.
In the
Route Name
field, type a name for this static route (for identification purposes only).
7.
Select the
Private
check box if you want to limit access to the LAN only.
If the
Private
check box is selected, the static route is not reported in RIP.
8.
Select the
Active
check box to make this route effective.
9.
Type the IP address of the final destination.
10.
Type the IP subnet mask for this destination.

Rate

3.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top