Page 11 / 125
Scroll up to view Page 6 - 10
Hardware Setup
11
N750 Wireless Dual Band Gigabit Router WNDR4300
Attach the Stand
For optimal wireless network performance, use the stand (included in the package) to
position your router upright.
1.
Orient your router vertically.
2.
Insert the tabs of the stand into the slots on the bottom of your router as shown.
Place your router in a suitable area for installation (near an AC power outlet and accessible
to the Ethernet cables for your wired computers).
Position Your Router
The router lets you access your network from virtually anywhere within the operating range of
your wireless network. However, the operating distance or range of your wireless connection
can vary significantly depending on the physical placement of your router. For example, the
thickness and number of walls the wireless signal passes through can limit the range. For
best results, place your router:
•
Near the center of the area where your computers and other devices operate, and
preferably within line of sight to your wireless devices.
•
So it is accessible to an AC power outlet and near Ethernet cables for wired computers.
•
In an elevated location such as a high shelf, keeping the number of walls and ceilings
between the router and your other devices to a minimum.
Page 12 / 125
Hardware Setup
12
N750 Wireless Dual Band Gigabit Router WNDR4300
•
Away from electrical devices that are potential sources of interference, such as ceiling
fans, home security systems, microwaves, computers, or the base of a cordless phone or
2.4-GHz cordless phone.
•
Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large
expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and
concrete can also affect your wireless signal.
•
With the antennas in a vertical position to provide the best side-to-side coverage or in a
horizontal position to provide the best up-and-down coverage, as applicable.
Cable Your Router
The installation guide that came in the box has a cabling diagram on the first page. This
section walks you through cabling with detailed illustrations.
1.
Connect the router, the computer, and the modem.
2.
Turn off and unplug the modem. If your modem has a backup battery, remove it as well.
1
Internet
DSL or cable
Modem
Page 13 / 125
Hardware Setup
13
N750 Wireless Dual Band Gigabit Router WNDR4300
3.
Locate the Ethernet cable (
1
) that connects your computer to the modem.
1
2
4.
Disconnect the cable from the modem (
2
). You will connect it to the router later.
5.
Locate the Ethernet cable that came with the NETGEAR product. Securely insert that
Ethernet cable into your modem and into the Internet port of the router (
3
).
3
6.
Locate the cable you removed from the modem in step 2. Securely insert that cable (
4
) into
a LAN port on the router such as LAN port 1.
4
Your network cables are connected, and you are ready to start your network. It is important
that you start your network in the correct sequence (first power on the modem, and after it
finishes starting up, power on the router).
Page 14 / 125
Hardware Setup
14
N750 Wireless Dual Band Gigabit Router WNDR4300
Verify the Cabling
Verify that your router is cabled correctly by checking the router LEDs. Turn on the router by
pressing the
On/Off
button on the back.
•
The Power LED lights amber when the router is turned on.
•
The LAN port LEDs light green for each computer cabled to the router.
•
The 2.4 GHz N/G-Band LED is lit, and the 5.0 GHz N-Band LED is lit.
•
The Internet LED is lit. If it is not, make sure that the Ethernet cable is securely
attached to the router Internet port and the modem, and that the modem is powered on.
Verify that the LAN
LEDs (1 through 4) are lit for any computers cabled to the router by
an Ethernet cable.
Page 15 / 125
15
2
2.
Getting Started with NETGEAR
genie
Connecting the router
This chapter explains how to use NETGEAR genie to set up your router after you complete
cabling as described in the installation guide and in the previous chapter.
This chapter contains the following sections:
•
Router Setup Preparation
•
Types of Logins and Access
•
Use NETGEAR genie after Installation
•
Upgrade the Firmware
•
Dashboard (Basic Home Screen)
•
Join Your Wireless Network
•
NETGEAR genie App and Mobile genie App
19216811.live